Airtac TACE Guided Compact Cylinder TACE63X45
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X45 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 45mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke45 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X45
The TACE63X45 is a double acting, non-rotating compact cylinder built to ISO 21287: a 63 mm bore drives a 16 mm hard-chrome S45C rod over a 45 mm stroke, with air fed through a 1/8" PT port. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa that rises to 2182.1 N push and 2041.3 N pull, with a theoretical peak of 317.9 kgf at 1.0 MPa.
Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures, guards and gantries where a full-length body will not fit. Plan on roughly 935 N of usable force at 0.5 MPa (about 60% of the push rating), which lifts about 79 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the optional -S magnet enables CMSE / DMSE switch sensing when ordered.
Airtac TACE Guided Compact Cylinder TACE63X45 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X45 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 45 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X45
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X45 Is Used
Bearing press fitting
Pressing ball bearings into pump housings on an automotive assembly line, where the 1558.6 N push at 0.5 MPa seats the race and the twin-guide yoke keeps the arbor square to the bore.
CNC fixture clamping
Clamping large aluminium castings on a machining-center fixture, where the 45 mm stroke clamps and releases inside a tight tooling plate and the non-rotating rods stop the clamp pad twisting.
Panel lift-and-place
Lifting about 79 kg steel panels between pallet stations in a packaging gantry, using the vertical-lift margin of the 63 mm bore with a pilot check valve to hold the load if air drops.
Is the Airtac TACE Guided Compact Cylinder TACE63X45 the Right Cylinder?
At 63 mm bore this sits in the mid-heavy class: the 50 mm bore pushes 981.7 N at 0.5 MPa if your load is lighter, while the 80 mm bore pushes 2513.3 N when you need more. The 45 mm stroke suits short clamp-and-press moves. Remember the rod drifts when air is lost - it never holds position - so add a rod lock or pilot check valve for a suspended load. Mounting options are FB flange, CA/CB clevis, CR and FTC, and the optional -S magnet is the only way to fit CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X45 FAQ
At 0.5 MPa the 63 mm bore pushes 1558.6 N and pulls 1458.1 N. At 0.7 MPa it pushes 2182.1 N and pulls 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, threaded aluminium covers and a fixed TPU bumper at both ends. Mounting choices are FB flange, CA/CB clevis, CR and FTC, and the rod end carries a female M10x1.5 thread. Position sensing needs the optional -S magnet code - without it no magnet is fitted, so CMSE / DMSE switches cannot be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X45
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.