Airtac TACE Guided Compact Cylinder TACE63X5
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X5 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 5mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke5 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X5
Built as a double acting, non-rotating compact cylinder, the AirTAC TACE63X5 pairs a 63 mm bore with a 5 mm stroke in an ISO 21287 short body. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push climbs to 2182.1 N, with a theoretical peak of 317.9 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press punch stays square without an external guide. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits inside tight jigs, guards and gantries.
For sizing, plan on about 935 N of usable force at 0.5 MPa (roughly 0.6 of the push figure) and expect it to lift about 79 kg vertically with a 2:1 margin. The roller-burnished bore is hard-anodized for wear resistance, the 16 mm rod is S45C steel with hard-chrome plating, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Supply air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s. No magnet is fitted on this code; the optional -S version accepts CMSE / DMSE switches.
Airtac TACE Guided Compact Cylinder TACE63X5 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X5 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 5 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X5
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X5 Is Used
CNC fixture clamping
A 5 mm clamp stroke is enough to seat a clamp shoe on an aluminium gearbox housing; 1558.6 N at 0.5 MPa holds the joint through a facing cut, and the twin-guide yoke keeps the shoe from twisting.
Short-travel bushing press
Pressing a sintered bushing into a pump cover needs travel, not reach: 2182.1 N of push at 0.7 MPa drives the insert home while the guide rods hold the punch square to the bore.
Packaging line reject gate
A 5 mm kick at 30-500 mm/s nudges an out-of-spec carton off a conveyor lane; the compact body slots inside the guard frame where a full-length profile cylinder would not fit.
Is the Airtac TACE Guided Compact Cylinder TACE63X5 the Right Cylinder?
For lighter clamps, the 50 mm bore pushes 981.7 N at 0.5 MPa; for heavier insertion work, step up to the 80 mm bore at 2513.3 N. This 5 mm stroke sits well inside the 250 mm maximum standard stroke for bore 63, so it ships as a standard item. Air on both ports means the piston drifts if pressure is lost - for a held load add a rod lock or pilot check valve. Mount it FB, CA, CB, CR or FTC; the rod ends in a female M10x1.5 thread and the air port is 1/8 inch PT. If switching is needed, order the -S magnet code rather than assuming a magnet is present.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X5 FAQ
At 0.5 MPa the 63 mm bore pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push rises to 2182.1 N with pull at 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed runs 30-500 mm/s on air filtered to 40 um.
It is an ISO 21287 compact cylinder: hard-anodized aluminium body, 16 mm hard-chrome plated S45C rod with a female M10x1.5 thread, 1/8 inch PT air port, and a fixed TPU bumper at each end that only decelerates the stroke ends. Mounting options are FB, CA, CB, CR and FTC. No magnet is fitted on this code, so no switch can be mounted; order the optional -S version to run CMSE or DMSE switches. Outline dimensions: confirm from datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X5
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.