Airtac TACE Guided Compact Cylinder TACE63X50
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X50 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X50
Double acting and non-rotating, the TACE63X50 is an ISO 21287 compact cylinder with a 63 mm bore and 50 mm stroke in a hard-anodized aluminium body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push rises to 2182.1 N and pull to 2041.3 N.
Plan on about 935 N of usable push at 0.5 MPa (roughly 0.6 of the rated force), and expect about 159 kg of vertical lift at full push - halve that to 79 kg for a 2:1 margin when matching a real part weight. The 16 mm S45C rod carries a hard-chrome plating and a female M10x1.5 thread, air supply is 1/8" PT ports, speed spans 30-500 mm/s across 0.15-1.0 MPa (22-145 psi), and a fixed TPU bumper absorbs end-of-stroke energy at both ends. No magnet is fitted on this code; order the -S version to enable CMSE / DMSE switches.
Airtac TACE Guided Compact Cylinder TACE63X50 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X50 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X50
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X50 Is Used
Bushing press station
Pressing bronze bushings into aluminium pump housings on an automation cell - the 50 mm stroke covers part insertion and 1558.6 N of push at 0.5 MPa handles light press fits without a hydraulic unit.
Carton reject pusher
Kicking off-spec cartons off a food packaging conveyor: the twin-guide yoke keeps the pusher plate square across the belt, and the compact body fits inside the line guarding.
Fixture lift in a machining cell
Raising a 70 kg welding fixture between cycles - with about 79 kg of vertical lift at a 2:1 margin, the 63 mm bore covers the weight and the female M10x1.5 rod thread takes the fixture plate directly.
Is the Airtac TACE Guided Compact Cylinder TACE63X50 the Right Cylinder?
If 1558.6 N at 0.5 MPa is more than the job needs, the TACE50 gives 981.7 N push at the same pressure; if the load grows, step up to the TACE80 for 2513.3 N. Remember the rod drifts when air is lost - add a rod lock or pilot check valve wherever a load must stay held. The 50 mm stroke sits well inside the 250 mm standard range for this bore, and FB flange, CA/CB clevis, CR or FTC mounts can be specified. Add the -S code if CMSE / DMSE position switches are planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X50 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N. At 0.7 MPa the figures rise to 2182.1 N push and 2041.3 N pull. The theoretical maximum is 317.9 kgf at 1.0 MPa, so size tooling around 935 N of usable push at 0.5 MPa for a comfortable margin.
The ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, so it suits tight jigs and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy but is not adjustable, and the rod will drift if air is lost - use a rod lock or pilot check valve to hold a load. Mounting choices are FB flange, CA/CB clevis, CR and FTC. The magnet is the optional -S code; with it, CMSE / DMSE switches read position. Rod thread is female M10x1.5 and ports are 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.