Airtac TACE Guided Compact Cylinder TACE63X80
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X80 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X80
The TACE63X80 is a double acting, non-rotating compact cylinder built to ISO 21287, with a 63 mm bore and an 80 mm stroke. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push rises to 2182.1 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa.
The hard-anodized aluminium body with an S45C hard-chrome plated rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs, guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy. In practice, plan for roughly 935 N of real work at 0.5 MPa, which lifts about 79 kg vertically with a 2:1 margin. Speed runs 30-500 mm/s on air at 0.15-1.0 MPa (22-145 psi).
Airtac TACE Guided Compact Cylinder TACE63X80 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X80 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X80
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X80 Is Used
Press-fit head on an electronics assembly line
The twin-guide yoke keeps the press tooling square through the 1558.6 N push at 0.5 MPa, so no external guide column is needed on the fixture.
Stop-and-index gate on a bottling conveyor
The 80 mm stroke clears the product stream between indexes, while the guide rods absorb the side load from off-center containers hitting the gate.
Clamp fixture on a carton sealing machine
Holds cases square at up to 2182.1 N at 0.7 MPa, and the short ISO 21287 body fits inside the sealing frame where a full-length profile cylinder will not.
Is the Airtac TACE Guided Compact Cylinder TACE63X80 the Right Cylinder?
At 1558.6 N push at 0.5 MPa, the 63 mm bore sits between the 50 mm bore (981.7 N) and the 80 mm bore (2513.3 N); step down if your load needs under about 590 N of real work, step up for heavy clamping. The piston drifts when air is lost, so add a rod lock or pilot check valve for a held load.
Mounting choices are FB flange, CA/CB clevis, CR or FTC, and the rod end carries a female M10x1.5 thread with a 1/8" PT port. Order the optional -S magnet if you want CMSE or DMSE switches; without -S no sensor can be mounted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X80 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N. At 0.7 MPa push is 2182.1 N and pull is 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. It runs on air at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), with a speed range of 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends. Mounting options are FB flange, CA/CB clevis, CR and FTC. Position sensing needs the optional -S magnet code: without -S there is no magnet and no switch can be fitted; with -S, CMSE or DMSE switches detect the piston position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.