Airtac TACE Guided Compact Cylinder TACE63X90
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X90 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X90
The TACE63X90 is a double acting, non-rotating ISO 21287 compact cylinder: a 63 mm bore with a 90 mm stroke on a hard-anodized aluminium body and an S45C hard-chrome-plated 16 mm rod. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa that rises to 2182.1 N push and 2041.3 N pull, with a theoretical maximum of 317.9 kgf at 1.0 MPa.
For real-world sizing, plan on about 935 N of usable force at 0.5 MPa, which lifts roughly 79 kg vertically with a 2:1 margin. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs, guards and gantries. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and a fixed TPU bumper sits at both ends. The magnet is not fitted on this code; order the optional -S version to enable CMSE / DMSE switches.
Airtac TACE Guided Compact Cylinder TACE63X90 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X90 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X90
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X90 Is Used
Bearing press-fit station
With 1558.6 N of push at 0.5 MPa, the twin-guide yoke presses bearings into pump housings on an automotive assembly cell while keeping the arbor square to the bore, no external guide needed.
Casting lift on a machine gantry
The 90 mm stroke and about 79 kg vertical-lift equivalent (2:1 margin) raise aluminium castings between machining stations, and the compact body tucks under low gantry guards.
Weld fixture clamping
Fixed to an FB flange, the cylinder clamps steel bracket weldments in a fixture, with the twin guide rods stopping the clamp pad from rotating under side load.
Is the Airtac TACE Guided Compact Cylinder TACE63X90 the Right Cylinder?
At 63 mm bore this sits in the mid-heavy class: step down to TACE50X90 for 981.7 N push at 0.5 MPa, or up to TACE80X90 for 2513.3 N if the load grows. The 90 mm stroke is well inside the standard range for this bore, so no made-to-order length is needed. Remember the piston drifts when air is lost; for a held load add a rod lock or pilot check valve. Mounting choices are FB flange, CA/CB clevis, CR and FTC, and the female M10x1.5 rod thread on the yoke takes your tooling directly. If you need end-of-stroke position signals, order the -S code so CMSE / DMSE switches can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X90 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it pushes 2182.1 N and pulls 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, running on air filtered to 40 um at 30-500 mm/s.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome-plated 16 mm rod, and a fixed TPU bumper at each end that absorbs end-of-stroke energy. Mountings are FB, CA, CB, CR and FTC, with a female M10x1.5 rod thread and 1/8" PT ports. No magnet is fitted on this code; order the optional -S version to run CMSE / DMSE switches. Note it does not hold position when air is lost, so use a rod lock or pilot check valve for a suspended load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.