Airtac TACE Guided Compact Cylinder TACE80X10S
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X10S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 10mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke10 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X10S
A double acting, non-rotating ISO 21287 compact cylinder, the TACE80X10S pairs an 80 mm bore and 10 mm stroke with a 20 mm S45C hard-chrome rod and a 1/4" PT port. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. At 0.5 MPa (72 psi) it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa (101 psi) those figures rise to 3518.6 N and 3298.7 N, with a theoretical 512.6 kgf at 1.0 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it drops into shallow jigs, guards and gantries where a longer body will not fit. For real-world sizing, plan on roughly 1508 N of usable push at 0.5 MPa - about 153 kg of work - or, for vertical lifts, halve the 256 kg lift equivalent to get a 2:1 margin of about 128 kg per unit. The -S code on this model means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be mounted, and a fixed TPU bumper absorbs end-of-stroke energy at both ends.
Airtac TACE Guided Compact Cylinder TACE80X10S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X10S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X10S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X10S Is Used
Short-stroke staking press
Staking or clinching terminals onto aluminium housings: the 10 mm stroke suits a shallow die set, and 2513.3 N of push at 0.5 MPa handles light forming work without a full-size press.
Robot gripper clamping
On a pick-and-place arm handling cast housings, the twin guide rods on the yoke keep the jaws from rotating under side load, so no external guide is needed for a square, repeatable grip.
Slide lock on a packaging line
A 10 mm shot pins or releases a carton slide on a filling machine; with the fitted -S magnet, CMSE / DMSE switches confirm pin-in and pin-out positions back to the PLC.
Is the Airtac TACE Guided Compact Cylinder TACE80X10S the Right Cylinder?
Downsizing? A 63 mm bore TACE gives 1558.6 N push at 0.5 MPa; upsizing to the 100 mm bore raises that to 3927.0 N. This 80 mm unit sits between them at 2513.3 N push and 2356.2 N pull. It will not hold a load if air is lost - the piston drifts - so fit a rod lock or pilot check valve where a suspended part must stay put. Mounting choices run FB flange, CA/CB clevis, CR and FTC, and because the -S magnet is fitted on this model, CMSE / DMSE switches can be added for end-of-stroke signals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X10S FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push reaches 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the fluid is air filtered to 40 um over a -20 to +70 C range.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits shallow fixtures. Twin guide rods on a yoke keep the load from rotating and carry side load, and a fixed TPU bumper decelerates the piston at each end. The -S code on this model means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be mounted for position feedback. Mounting options include FB flange, CA/CB clevis, CR and FTC; the female rod thread is M12x1.75.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.