Airtac TACE Guided Compact Cylinder TACE80X30
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X30 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 30mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke30 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X30
Double acting and non-rotating, the AirTAC TACE80X30 pairs an 80 mm bore with a 30 mm stroke in an ISO 21287 compact body. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N on the push stroke at 0.7 MPa, with a theoretical peak of 512.6 kgf. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide.
For real work, plan on roughly 1508 N of usable push at 0.5 MPa; in vertical terms that is about 256 kg of lift, or a comfortable 128 kg with a 2:1 margin. The hard-anodized aluminium body runs a 20 mm S45C hard-chrome rod and takes a 1/4" PT port, while the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder - handy inside tight guards and gantries. A fixed TPU bumper absorbs end-of-stroke energy at both ends; speed runs 30-500 mm/s across 0.15-1.0 MPa (22-145 psi).
Airtac TACE Guided Compact Cylinder TACE80X30 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X30 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 30 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X30
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X30 Is Used
Automotive bracket stamping fixture
The 2513.3 N push at 0.5 MPa swages or clinches thin steel brackets in a weld-shop jig, and the twin-guide yoke keeps the punch head square to the die through 30 mm of travel.
Gearbox housing clamping on a machining line
Mounted via an FB flange inside a tight CNC guard, the short body clamps aluminium housings against a fixture with about 1508 N of usable force, freeing space a longer cylinder would eat.
Bearing press for pump assembly benches
A 30 mm stroke presses sealed bearings into pump end bells at bench pressure, with the 20 mm hard-chrome rod resisting side load from hand-loaded parts.
Is the Airtac TACE Guided Compact Cylinder TACE80X30 the Right Cylinder?
At 0.5 MPa this 80 mm bore pushes 2513.3 N. Step down to a 63 mm bore (1558.6 N push) if the load is lighter, or up to a 100 mm bore (3927.0 N push) when you need more muscle - both share the same compact footprint logic. The 30 mm stroke sits well inside the 300 mm maximum standard stroke for this bore, so it ships as a catalogue item. Remember the piston drifts if air is lost; for a held load add a rod lock or pilot check valve.
Mounting options are FB flange, CA/CB clevis, CR and FTC, and the rod end carries a female M12x1.75 thread with no rod-thread code on the yoke. If you need end-of-stroke signalling, order the optional -S magnet code so CMSE or DMSE switches can ride the body slots; without -S there is no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X30 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push rises to 3518.6 N with pull at 3298.7 N. The theoretical maximum is 512.6 kgf at 1.0 MPa. Supply air is filtered to 40 um at 0.15-1.0 MPa (22-145 psi), with proof pressure 1.5 MPa (215 psi), and rod speed spans 30-500 mm/s.
The 80 mm compact body accepts FB flange, CA/CB clevis, CR and FTC mounts, and the rod end is a female M12x1.75 thread. Its short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper decelerates the piston at both ends. For sensing, order the optional -S magnet code, which lets CMSE or DMSE switches sit in the body slots; without -S there is no magnet. If a load must stay put when air drops, add a rod lock or pilot check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.