Airtac TACE Guided Compact Cylinder TACE80X35S
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X35S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X35S
Double acting and non-rotating, the AirTAC TACE80X35S pairs an 80 mm bore with a 35 mm stroke inside an ISO 21287 compact body. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those figures climb to 3518.6 N and 3298.7 N, with a theoretical 512.6 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without any external guide.
The hard-anodized aluminium body carries a 20 mm S45C rod with hard-chrome plating, and fixed TPU bumpers absorb end-of-stroke energy at both ends. Its short frame saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is exactly what tight press gantries and guarded cells need. Plan on roughly 1508 N of real work at 0.5 MPa (about 0.6 of the rating), enough to lift about 128 kg vertically with a 2:1 margin. The -S magnet this model carries lets CMSE / DMSE switches report rod position.
Airtac TACE Guided Compact Cylinder TACE80X35S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X35S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 35 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X35S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X35S Is Used
Terminal crimp press
A 35 mm stroke is ideal for a compact crimping head on a wiring-harness line: 2513.3 N of push at 0.5 MPa sets the terminal, while the twin-guide yoke keeps the anvil square to the ram.
Housing lift station
Mounted under a pick-up plate, this cylinder raises cast aluminium gearbox housings of about 128 kg in an assembly cell, with CMSE switches confirming up and down via the -S magnet.
CNC pallet clamp
On a machining-centre fixture, the 80 mm bore clamps a steel workpiece against the pallet; side load from offset clamping points is carried by the guide rods, not the rod itself.
Is the Airtac TACE Guided Compact Cylinder TACE80X35S the Right Cylinder?
Sizing down, the bore 63 TACE pushes 1558.6 N at 0.5 MPa; sizing up, the bore 100 reaches 3927.0 N. This 80 mm model sits between them at 2513.3 N push and 2356.2 N pull. It does not hold position when air is lost - the piston drifts - so add a rod lock or pilot check valve under any suspended load.
Mount it FB, CA, CB, CR or FTC; the 1/4" PT port and female M12x1.75 rod thread take standard fittings. The -S magnet is already on this variant, so CMSE / DMSE switches can be fitted from day one; the 35 mm stroke is well inside the 300 mm standard range for this bore.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X35S FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa, 3518.6 N push and 3298.7 N pull; theoretical maximum 512.6 kgf at 1.0 MPa. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with 1/4" PT ports and a female M12x1.75 rod thread.
The ISO 21287 short frame saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow guards and tight jigs. Fixed TPU bumpers sit at both stroke ends. Choose FB flange, CA/CB clevis, CR or FTC mounting. Because this model carries the -S magnet, CMSE / DMSE reed or solid-state switches can be slid into the body slots for end-of-stroke signalling.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.