Airtac TACE Guided Compact Cylinder TACE80X45
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X45 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 45mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke45 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X45
The TACE80X45 is a double acting, non-rotating compact cylinder built to ISO 21287: an 80 mm bore with a 45 mm stroke, a 20 mm hard-chrome-plated S45C rod and a 1/4" PT port. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those figures rise to 3518.6 N and 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight weld jigs and press fixtures where a full-length body will not fit. Plan for roughly 1508 N of real work at 0.5 MPa, about 60% of the push rating, which lifts about 128 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the optional -S magnet enables CMSE / DMSE switches - without the -S code there is no magnet and no sensing.
Airtac TACE Guided Compact Cylinder TACE80X45 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X45 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 45 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X45
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X45 Is Used
Short-stroke staking press
A 45 mm stroke is ideal for staking or swaging aluminium terminal housings; the twin-guide yoke keeps the punch square under the 2513.3 N push force at 0.5 MPa.
Carton diverting on packaging lines
Mounted beside a conveyor, the 80 mm bore pushes cartons between lanes with 2513.3 N at 0.5 MPa, and the short ISO 21287 body fits inside the guarding.
Clamping automotive weld jigs
With about 1508 N of usable force at 0.5 MPa, the TACE80X45 clamps steel brackets in fixture nests while the twin guide rods stop the clamp arm rotating.
Is the Airtac TACE Guided Compact Cylinder TACE80X45 the Right Cylinder?
Sizing check: a 63 mm bore pushes 1558.6 N at 0.5 MPa, so step up to this 80 mm bore once the load passes roughly 900 N of real work; a 100 mm bore (3927.0 N push at 0.5 MPa) covers heavier press and clamp duties. The piston drifts when air is lost - it never holds position - so add a rod lock or pilot check valve for any suspended load. Mount with the FB flange, CA or CB clevis, CR or FTC feet, and order the -S code if CMSE / DMSE switch sensing is needed; the yoke carries no rod-thread option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X45 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N. The theoretical maximum is 512.6 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure is 1.5 MPa (215 psi), and speed range is 30-500 mm/s on filtered air.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body and an S45C hard-chrome-plated 20 mm rod; the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. A fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting options are FB flange, CA/CB clevis, CR and FTC. Sensors need the optional -S magnet code, which allows CMSE / DMSE switches - without -S there is no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X45
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.