Airtac TACE Guided Compact Cylinder TACE80X75
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X75 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X75
The TACE80X75 is a double acting, non-rotating compact cylinder built to ISO 21287: a hard-anodized aluminium body with an S45C hard-chrome plated 20 mm rod and a fixed TPU bumper at each end. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those figures rise to 3518.6 N and 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 80 mm bore fits tight presses, guards and gantries. Plan for roughly 1508 N of real work at 0.5 MPa (about 60% of the push rating), which lifts about 128 kg vertically with a 2:1 margin. Air supply runs 0.15-1.0 MPa (22-145 psi), speed spans 30-500 mm/s, and the 1/4" port takes PT thread. The piston drifts when air is lost, so fit a rod lock or pilot check valve wherever a load must stay held.
Airtac TACE Guided Compact Cylinder TACE80X75 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X75 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X75
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X75 Is Used
Short-stroke press and clinch station
A 75 mm stroke with 2513.3 N push at 0.5 MPa suiting clinching or staking of aluminium housings on an electronics assembly line, where the twin-guide yoke keeps the punch square to the die.
Carton diverting on packaging conveyors
Pushing 10-20 kg cartons between lanes at up to 500 mm/s, with the non-rotating pusher plate staying flat against the load and the compact body fitting under low conveyor guard rails.
Weld fixture clamping in automotive cells
Clamping steel brackets inside a robotic weld jig, where the about 128 kg vertical-lift equivalent gives margin on part hold-down and the short body clears the fixture clamp arms.
Is the Airtac TACE Guided Compact Cylinder TACE80X75 the Right Cylinder?
At 0.5 MPa this 80 mm bore delivers 2513.3 N push and 2356.2 N pull; step down to the 63 mm bore (1558.6 N push) for lighter clamping, or up to the 100 mm bore (3927.0 N push) when the tooling needs more muscle. The 75 mm stroke sits well inside the 300 mm standard range for bore 80, so no made-to-order stroke is involved.
Mount on an FB flange, CA/CB clevis, CR bracket or FTC foot to match the jig, and order the optional -S magnet if you want CMSE or DMSE switches for end-of-stroke sensing; without -S there is no magnet in the cylinder. The rod ends in a female M12x1.75 thread, and remember the piston will not hold position if air pressure drops.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X75 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N. The theoretical maximum is 512.6 kgf at 1.0 MPa. For sizing, treat about 1508 N (roughly 60% of the push figure) as the usable working force, which lifts about 128 kg vertically with a 2:1 margin.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs and guards. A fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting options are FB flange, CA/CB clevis, CR and FTC. Sensing requires the optional -S magnet code; with it, CMSE or DMSE switches mount in the body slots, without it there is no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.