Airtac TACE Guided Compact Cylinder TACE80X90S
The AirTAC Airtac TACE Guided Compact Cylinder TACE80X90S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke90 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE80X90S
The TACE80X90S is a double acting, non-rotating compact cylinder built to ISO 21287: an 80 mm bore with a 90 mm stroke, a 20 mm hard-chrome S45C rod and a 1/4" PT port. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those figures rise to 3518.6 N and 3298.7 N, with a theoretical peak of 512.6 kgf at 1.0 MPa.
Plan on roughly 1508 N of real work at 0.5 MPa, and expect the rod to lift about 128 kg vertically with a 2:1 margin. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, freeing space in tight gantries, guards and jigs. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be mounted for end-of-stroke sensing. A fixed TPU bumper at each end absorbs end-of-stroke energy; operating pressure spans 0.15-1.0 MPa (22-145 psi) and speed runs 30-500 mm/s.
Airtac TACE Guided Compact Cylinder TACE80X90S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE80X90S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE80X90S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE80X90S Is Used
Bearing press station
With 2513.3 N of push at 0.5 MPa, the 80 mm bore presses bearings and bushings into pump housings on an automotive assembly line, while the twin-guide yoke keeps the arbor square to the bore through the full 90 mm stroke.
Aluminium casting clamp
On a CNC machining fixture, the 90 mm stroke closes over tall riser blocks to clamp large aluminium castings, and the non-rotating guide rods stop the clamp pad twisting under 3518.6 N of push at 0.7 MPa.
Die change lift assist
Fitted vertically in a stamping die cart, the rod lifts about 128 kg of locating pins and spacers with a 2:1 margin, and CMSE / DMSE switches on the -S magnet confirm top-of-stroke before the crane moves.
Is the Airtac TACE Guided Compact Cylinder TACE80X90S the Right Cylinder?
If 2513.3 N at 0.5 MPa is more than the job needs, step down to the 63 mm bore at 1558.6 N; if it falls short, the 100 mm bore delivers 3927.0 N. The rod drifts when air is lost, so add a rod lock or pilot check valve wherever a load must stay put. Mount with an FB flange, CA/CB clevis, CR or FTC feet; there is no rod-thread code on the yoke, and the female M12x1.75 rod thread accepts standard tooling. The 90 mm stroke sits inside the standard range for this bore, so no made-to-order build is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE80X90S FAQ
At 0.5 MPa the 80 mm bore pushes 2513.3 N and pulls 2356.2 N. At 0.7 MPa push rises to 3518.6 N and pull to 3298.7 N. The theoretical maximum is 512.6 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa (22-145 psi), proof pressure is 1.5 MPa (215 psi), and speed runs 30-500 mm/s on air filtered to 40 um.
It is a short ISO 21287 compact cylinder with a hard-anodized aluminium body, an S45C hard-chrome rod and a fixed TPU bumper at each end, saving about 50% of the mounting length of an ISO 15552 profile cylinder. Mounting options are FB flange, CA/CB clevis, CR and FTC; the rod end is female M12x1.75 and the port is 1/4" PT. Because this is the -S version, the magnet is fitted and CMSE / DMSE reed or solid-state switches can be added for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE80X90S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.