Airtac TACED Guided Compact Cylinder TACED100X35
The AirTAC Airtac TACED Guided Compact Cylinder TACED100X35 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø100mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ100 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED100X35
A double acting, double-rod compact cylinder built to ISO 21287, the TACED100X35 pushes a 100 mm bore through a 35 mm stroke with a rod leaving both covers. Because each side sees the rod-side area, output is a matched 3769.9 N at 0.5 MPa in either direction - no push/pull mismatch to design around. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight weld jigs and guarded gantries. For sizing, treat roughly 2262 N (0.6 of the 0.5 MPa rating) as the usable working force, and with a 2:1 margin it lifts about 192 kg vertically. A fixed TPU bumper at each end absorbs end-of-stroke shock, the S45C hard-chrome rod resists wear, and the optional -S magnet enables CMSE / DMSE switches - without that code no magnet is fitted.
Airtac TACED Guided Compact Cylinder TACED100X35 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED100X35 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED100X35
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED100X35 Is Used
Automotive weld fixture clamping
The twin guide yoke keeps a weld-nest clamp plate square under the 3769.9 N clamping load, and the 35 mm stroke suits a short clamp-and-hold cycle inside a tight fixture frame.
Palletizing conveyor pusher
Equal 3769.9 N in both directions lets one cylinder push a pallet into position and retract with the same force, while the non-rotating yoke keeps the pusher shoe aligned across the belt.
Vertical lift on a packaging machine
With a 2:1 margin the bore 100 rod side lifts about 192 kg vertically, so changeover plates and heavy gate assemblies can be raised on the 35 mm stroke without an external guide.
Is the Airtac TACED Guided Compact Cylinder TACED100X35 the Right Cylinder?
At 3769.9 N per side this is the top of the TACED range; step down to the 63 mm bore (1458.1 N both ways) for lighter clamping, or stay here for heavy press and lift work. Stroke 35 mm is within the 300 mm standard range for bore 100, so no made-to-order build is needed. Ports are 1/4" and the rod end carries a female M12x1.75 thread. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must be held. FB flange, CA, CB, CR and FTC mountings are available, and order the -S code if CMSE / DMSE position sensing is planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED100X35 FAQ
Yes - the double-rod design exposes the rod-side area on both sides, so output is equal in extend and retract: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, with a maximum of 768.8 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the bore 100 port thread is 1/4" with a female M12x1.75 rod end.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to absorb end-of-stroke shock. Position sensing depends on the optional -S magnet: order TACED100X35S and CMSE / DMSE switches can be mounted in the body slots; without the -S code there is no magnet and no switch can be read.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED100X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.