Airtac TACED Guided Compact Cylinder TACED20X35
The AirTAC Airtac TACED Guided Compact Cylinder TACED20X35 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø20mm bore and 35mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ20 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED20X35
Double acting with a through rod that exits both covers, the TACED20X35 delivers 117.8 N in each direction at 0.5 MPa (164.9 N at 0.7 MPa) because both strokes work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry light side load, so a small gripper or pusher plate stays square without an external guide. The 20 mm bore takes an M5x0.8 port and a female M6x1.0 rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which makes this 35 mm stroke version easy to drop into tight fixtures and guarding. At 0.5 MPa the 117.8 N output lifts about 12 kg vertically, or plan on roughly 6 kg with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the optional -S magnet enables CMSE / DMSE switches - without the -S code there is no magnet.
Airtac TACED Guided Compact Cylinder TACED20X35 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED20X35 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø20mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED20X35
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 20 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED20X35 Is Used
Small-part gripper on a pick station
The through rod closes the gripper with the same 117.8 N it opens with, and the twin guide yoke keeps the jaws from twisting on misaligned parts.
Reject pusher on a bottling line
A 35 mm stroke is enough to kick an undersized bottle off a narrow conveyor lane, and the compact body fits between the guide rails.
Sample press in a lab autosampler
About 6 kg of usable vertical force at 0.5 MPa seats vials or caps gently, with the TPU bumper softening every end-of-stroke stop.
Is the Airtac TACED Guided Compact Cylinder TACED20X35 the Right Cylinder?
For this 20 mm bore, 117.8 N both ways at 0.5 MPa suits light clamping and small part transfer. Step down to TACED16 (75.4 N) for lighter tooling, or up to TACED25 (206.2 N) when the load grows. The 35 mm stroke sits well inside the 100 mm maximum standard stroke for bore 20, so it ships as a standard build. Order the -S code if you need position sensing, and pick FB flange or CA/CB/CR/FTC mounts to suit the machine. Note the piston will drift if air is lost - add a rod lock or pilot check valve where a held load matters.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED20X35 FAQ
Because it is a double-rod cylinder, output is equal in both directions: 117.8 N at 0.5 MPa and 164.9 N at 0.7 MPa, with a maximum of 24.0 kgf at 1.0 MPa. That 117.8 N corresponds to lifting about 12 kg vertically, or roughly 6 kg with a 2:1 safety margin. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and the M5x0.8 port is fixed by the 20 mm bore.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated rod, and a fixed TPU bumper at each end that only decelerates the stroke ends. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Position sensing requires the optional -S magnet code - order TACED20X35S and CMSE / DMSE switches can be mounted in the body slots; the base model has no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED20X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.