Airtac TACED Guided Compact Cylinder TACED32X60S
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X60S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X60S
Double acting with a rod leaving both covers, the TACED32X60S pushes and pulls with identical force: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa in either direction, because both chambers work on the rod-side area. Twin guide rods on the yoke stop the tooling twisting and take side load, so a gripper or press plate stays square without an external guide. The 60 mm stroke sits well inside the 200 mm standard range for this 32 mm bore, and the 1/8" port feeds each end.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs, guards and gantries. A hard-anodized aluminium body carries an S45C hard-chrome rod, and fixed TPU bumpers absorb the end-of-stroke shock at both covers. Because the -S code is on this model, the magnet is fitted and CMSE or DMSE reed or solid-state switches can be clipped onto the body slots. A practical sizing check: at 0.5 MPa plan on roughly 207 N of real work, which lifts about 17 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED32X60S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X60S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X60S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X60S Is Used
Symmetric push-pull stamping head
A small marking or embossing head on a fixture bench needs the same 345.6 N on the downstroke and the return; the double rod delivers both without a larger bore, and the twin guide yoke keeps the tool square over the 60 mm travel.
Pick-and-place gripper arm
On an electronics assembly cell, a gripper fed by this cylinder closes and opens with equal grip force at 0.5-0.7 MPa, while the non-rotating guide rods hold part orientation; the fitted magnet and a CMSE switch confirm open and closed positions.
Conveyor push-off diverter
Kicking cartons sideways off a packaging line needs a fast, balanced stroke; 483.8 N at 0.7 MPa both ways within a body about 50% shorter than an ISO 15552 profile cylinder fits the narrow space beside the belt.
Is the Airtac TACED Guided Compact Cylinder TACED32X60S the Right Cylinder?
At 345.6 N per direction this bore covers light clamping and transfer heads; step down to a 25 mm bore (206.2 N) for gentler loads or up to 40 mm (571.8 N) when the job grows. Remember the piston drifts if air is lost, so add a rod lock or pilot check valve where a load must stay put. FB flange mounting suits plate-fixed installations, and the fitted -S magnet means CMSE / DMSE position switches work straight away.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X60S FAQ
Yes - the double-rod design exposes both chambers to the rod-side area, so output is equal either way: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C on air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow gantries and guarded zones. Fixed TPU bumpers at both ends absorb end-of-stroke impact. Because this model carries the optional -S magnet, CMSE or DMSE switches mount in the body slots for end-of-stroke or mid-stroke sensing; FB flange mounting is available for rigid plate fixing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.