Airtac TACED Guided Compact Cylinder TACED32X75
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X75 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X75
Double acting and double rod, the AirTAC TACED32X75 pushes a rod out of both covers of a 32 mm bore, so the force is identical in each direction: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, taken from the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. The 75 mm stroke sits inside the 200 mm standard range for this bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs, guards and gantries. A hard-anodized aluminium body with a burnished bore runs against an S45C hard-chrome-plated rod, and fixed TPU bumpers absorb end-of-stroke energy at both ends. For a real part match, plan on roughly 207 N of usable work at 0.5 MPa, which lifts about 21 kg vertically with a 2:1 margin. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).
Airtac TACED Guided Compact Cylinder TACED32X75 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X75 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X75
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X75 Is Used
Clamp-and-present fixture
The 345.6 N through-rod clamps a machined aluminium bracket in a milling jig while the twin guide rods keep the clamp pad square to the datum.
Bidirectional pusher on a packaging line
Equal force in both directions lets one 75 mm stroke divert cartons left or right at up to 500 mm/s without swapping the air connection.
Small-parts transfer gantry
The short ISO 21287 body fits under a low gantry beam, and the non-rotating yoke keeps a vacuum plate aligned over a PCB tray.
Is the Airtac TACED Guided Compact Cylinder TACED32X75 the Right Cylinder?
At 32 mm bore the TACED32X75 delivers 345.6 N both ways at 0.5 MPa. If your load needs less, the 25 mm bore gives 206.2 N; if you need more headroom, step up to the 40 mm bore at 571.8 N. Remember the piston drifts when air is lost, so add a rod lock or pilot check valve if the load must be held. This version has no magnet, so CMSE or DMSE switches cannot be fitted; order the -S code if you need position sensing. Mounting is FB flange, ports are 1/8" PT, and the rod end is female M8x1.25.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X75 FAQ
Yes. Because a rod exits both covers, both strokes act on the rod-side area of the 32 mm bore: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, equal in extend and retract. The maximum force at 1.0 MPa is 70.5 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 75 mm stroke is within the 200 mm standard range for this bore.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, an S45C hard-chrome-plated rod and a fixed TPU bumper at each end that only decelerates the piston. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. Sensing is not fitted on this model: order the optional -S magnet code to enable CMSE or DMSE switches, and use FB flange mounting if you need a bolted interface.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.