Airtac TACED Guided Compact Cylinder TACED50X35
The AirTAC TACED Guided Compact Cylinder TACED50X35 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X35
Double acting with a rod leaving both covers, the TACED50X35 delivers an identical 881.2 N in each direction at 0.5 MPa (1233.7 N at 0.7 MPa), because both faces work on the same rod-side area of the 50 mm bore. Twin guide rods on the yoke keep a gripper or press plate square with no external guide, and the 35 mm stroke suits short-reach tooling. The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding.
Build quality is genuine AirTAC: a roller-burnished, hard-anodized aluminium body, an S45C hard-chrome-plated 16 mm rod, and threaded aluminium covers for fast service. A fixed TPU bumper at each end absorbs end-of-stroke shock. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the female rod thread is M10x1.5 with a 1/8" PT port.
Airtac TACED Guided Compact Cylinder TACED50X35 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X35 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X35
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X35 Is Used
Clamping machined housings
The equal 881.2 N push and pull at 0.5 MPa clamps and releases an aluminium gearbox housing in a CNC fixture, with the twin guide yoke holding the clamp shoe square.
Reject pusher on packaging lines
A 35 mm stroke is enough to kick off-spec cartons sideways off a conveyor, and the short ISO 21287 body fits inside the machine guarding where a full-length cylinder cannot.
Is the Airtac TACED Guided Compact Cylinder TACED50X35 the Right Cylinder?
At 50 mm bore this model sits between the 40 mm size (571.8 N at 0.5 MPa) and the 63 mm size (1458.1 N at 0.5 MPa), so pick the 40 when space is tighter and the 63 when you need roughly 65% more force. The 35 mm stroke is a standard length for this bore, so no made-to-order lead time applies. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. Mounting is FB flange, and if you need position sensing, order the optional -S magnet version to enable CMSE / DMSE switches; this base model has no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X35 FAQ
Yes - the double-rod design exposes the rod-side area on both faces, so output is identical in each direction: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a maximum of 179.7 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FB flange mounting. Position sensing requires the optional -S magnet code, which allows CMSE or DMSE switches; this base TACED50X35 has no magnet, so no sensor can be mounted on it.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.