Airtac TACED Guided Compact Cylinder TACED50X35S
The AirTAC TACED Guided Compact Cylinder TACED50X35S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X35S
A double acting, double-rod ISO 21287 compact cylinder, the TACED50X35S pushes a 16 mm rod out of BOTH covers, so its 881.2 N output at 0.5 MPa is identical in each direction - the rod-side area works both ways. Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or press plate square without an external guide. The 50 mm bore reaches 1233.7 N at 0.7 MPa (equal both ways) and up to 179.7 kgf at 1.0 MPa.
The hard-anodized aluminium body with S45C hard-chrome rod is built for service life, and the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder - useful in tight jigs and guarded cells. This S-coded model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be mounted for end-of-stroke sensing. A fixed TPU bumper sits at both ends, and the female M10x1.5 rod thread on the yoke accepts standard tooling.
Airtac TACED Guided Compact Cylinder TACED50X35S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X35S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X35S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X35S Is Used
Symmetric press fixture
The equal 881.2 N force in both directions lets one TACED50X35S stake or form parts on either face of a rotary indexing table without recalibrating for direction.
Pick-and-place gripper actuator
Twin guide rods keep the gripper jaws from rotating while the 35 mm stroke opens and closes on 45 kg-class castings transferred between CNC stations.
Bidirectional pusher on a packaging line
A through-rod pushes cartons off the belt from either side at 30-500 mm/s, with CMSE switches on the -S magnet confirming each reject stroke.
Is the Airtac TACED Guided Compact Cylinder TACED50X35S the Right Cylinder?
At 881.2 N per direction, the 50 mm bore suits clamping and pressing work in the 50-80 kg class. Step down to the 40 mm bore (571.8 N at 0.5 MPa) for lighter fixtures, or up to the 63 mm bore (1458.1 N) when the job needs more muscle at the same 1/8" port size. The 35 mm stroke sits well inside the standard range for bore 50, so it ships as a catalogue item. Mount with the FB flange; there is no rod-thread code on the yoke. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay put. Order the -S magnet (fitted on this model) if CMSE / DMSE switch feedback is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X35S FAQ
Yes - the double-rod design exposes the rod-side area on both sides, so force is equal each way: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, peaking at 179.7 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), on air filtered to 40 um, running 30-500 mm/s at -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 50 mm bore fits shallow slides and guarded gantries. The S in TACED50X35S means the optional -S magnet is fitted, letting CMSE / DMSE reed or solid-state switches clip onto the body slots for position feedback. Ends of stroke are decelerated by fixed TPU bumpers, and mounting is via the FB flange.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.