Airtac TACED Guided Compact Cylinder TACED50X50
The AirTAC TACED Guided Compact Cylinder TACED50X50 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X50
Double acting with a double rod that exits both covers, the AirTAC TACED50X50 delivers 881.2 N in each direction at 0.5 MPa (1233.7 N at 0.7 MPa), because both strokes work on the rod-side area. Twin guide rods on a yoke keep the tooling square and carry side load, so a gripper or press plate stays aligned without an external guide. The 50 mm bore, 50 mm stroke package runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) and travels at 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which makes the TACED50X50 easy to drop into tight fixtures and machine frames. A hard-anodized aluminium body carries an S45C hard-chrome rod, and a fixed TPU bumper at each end absorbs end-of-stroke energy. For position sensing, order the optional -S magnet so CMSE / DMSE switches can be fitted; without -S there is no magnet.
Airtac TACED Guided Compact Cylinder TACED50X50 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X50 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X50
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X50 Is Used
Clamping in CNC fixtures
The 881.2 N clamping force available in both directions lets one TACED50X50 hold a machined housing from either side inside a compact fixture, with the twin guide yoke keeping the clamp pad square to the part.
Small press and forming stations
With about 529 N of usable working force at 0.5 MPa, this cylinder suits light staking, marking and snap-fit pressing on electronics assemblies where a full-length body would not fit the station.
Palletizer push-off arm
The 50 mm stroke pushes cartons off a conveyor lane at up to 500 mm/s, and the equal double-rod force means the retract stroke returns the arm with the same 881.2 N even under side load.
Is the Airtac TACED Guided Compact Cylinder TACED50X50 the Right Cylinder?
At 50 mm bore the TACED50X50 sits in a mid-heavy class: 881.2 N both ways at 0.5 MPa. If your load needs less, a TACED32X25 gives 345.6 N; if you need more, step up to a TACED63X50 at 1458.1 N. Remember the piston drifts when air is lost, so add a rod lock or pilot check valve if a load must stay held. The 50 mm stroke is within the 250 mm max standard stroke for this bore, and FB flange mounting plus the optional -S magnet for CMSE / DMSE switches can be added at order time.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X50 FAQ
The 50 mm bore double-rod design gives 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, equal in both directions because both strokes use the rod-side area. Maximum force at 1.0 MPa is 179.7 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow machine frames. A fixed TPU bumper at each end absorbs end-of-stroke energy. FB flange mounting is available, and the optional -S magnet enables CMSE / DMSE switches; without -S no magnet is fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.