Airtac TACED Guided Compact Cylinder TACED50X75
The AirTAC TACED Guided Compact Cylinder TACED50X75 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X75
A double acting, double-rod compact cylinder built to ISO 21287, the TACED50X75 pushes a 50 mm bore through a 75 mm stroke with a rod leaving both covers. Because each side sees the rod-side area, output is identical in both directions: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a peak of 179.7 kgf at 1.0 MPa. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide.
The hard-anodized aluminium body with an S45C hard-chrome rod shrinks the mounting length to roughly half that of an ISO 15552 profile cylinder, freeing space in tight jigs and gantries. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and a fixed TPU bumper absorbs end-of-stroke shock at both ends.
Airtac TACED Guided Compact Cylinder TACED50X75 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X75 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X75
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X75 Is Used
Symmetric press or riveting fixture
Equal 881.2 N force in both directions lets one TACED50X75 clamp a workpiece on the approach stroke and eject it on the return, with the twin guide yoke keeping the punch square over the 75 mm travel.
Bidirectional divert gate on a packaging line
A rod exiting both covers means the same 1233.7 N at 0.7 MPa pushes cartons left or right from a single cylinder, and the non-rotating yoke keeps the gate plate aligned without side guides.
Is the Airtac TACED Guided Compact Cylinder TACED50X75 the Right Cylinder?
At 881.2 N both ways, the 50 mm bore sits between the 40 mm class (571.8 N at 0.5 MPa) and the 63 mm class (1458.1 N at 0.5 MPa), so step up only if your fixture needs the extra margin. The 75 mm stroke is well inside the 250 mm standard range for this bore. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must be held. Mount with the FB flange, and if you need position feedback, order the -S code so CMSE / DMSE switches can be fitted; without -S there is no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X75 FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so output is equal either way: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, peaking at 179.7 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, and the fluid is air filtered to 40 um. The rod is 16 mm with an M10x1.5 female thread, the port is 1/8" PT, and the 75 mm stroke is a standard length for this bore.
It is an ISO 21287 compact cylinder: the hard-anodized aluminium body with threaded aluminium covers saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Sensing is an option, not a default: order the -S code to get the magnet that lets CMSE / DMSE reed or solid-state switches read position along the body's magnet slots. Without -S there is no magnet and no switch can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.