Airtac TACED Guided Compact Cylinder TACED63X100
The AirTAC TACED Guided Compact Cylinder TACED63X100 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X100
The TACED63X100 is a double acting, double-rod compact cylinder built to ISO 21287: a 63 mm bore with a 16 mm rod exiting BOTH covers, so the output force is identical in each direction - 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The hard-anodized aluminium body with an S45C hard-chrome-plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this 100 mm stroke unit fits deep into tight jigs and gantries where a full-length cylinder will not reach. A fixed TPU bumper at each end absorbs end-of-stroke energy; the magnet is the optional -S code, so order TACED63X100S if you need CMSE / DMSE switch sensing.
Airtac TACED Guided Compact Cylinder TACED63X100 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X100 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X100
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X100 Is Used
CNC fixture clamping
The equal 1458.1 N force in both directions clamps and releases a machining fixture with identical pressure, while the twin guide rods keep the clamp plate square to the part.
Pallet-stacker load pusher
A 100 mm stroke pusher on warehouse handling equipment uses the 63 mm bore's thrust to square pallets on a conveyor, with the compact body fitting the narrow truck mast.
Lab press with guided platen
A small test-rig platen is driven and retracted by the through-rod at 2041.3 N at 0.7 MPa, the non-rotating yoke preventing platen twist during compression tests.
Is the Airtac TACED Guided Compact Cylinder TACED63X100 the Right Cylinder?
At 1458.1 N per side, the 63 mm bore sits between the 50 mm bore (881.2 N at 0.5 MPa) and the 80 mm bore (2356.2 N at 0.5 MPa) - step down if your load is under 800 N, step up for heavy clamping. The 100 mm stroke is within the standard range for this bore, so no made-to-order stroke is needed. Remember the piston drifts when air is lost: for a held vertical load add a rod lock or pilot check valve. Mounting is FB flange; the rod end carries a female M10x1.5 thread and ports are 1/8" PT (G on request).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X100 FAQ
Yes - because a rod exits both covers, both strokes act on the rod-side area, so output is equal each way: 1458.1 N at 0.5 MPa, 2041.3 N at 0.7 MPa, and a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to absorb end-of-stroke impact. Sensing requires the optional -S magnet: order TACED63X100S and CMSE / DMSE switches can be mounted in the body slots; without -S no magnet is fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.