Airtac TACED Guided Compact Cylinder TACED63X10S
The AirTAC TACED Guided Compact Cylinder TACED63X10S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X10S
Double acting with a rod leaving both covers, the TACED63X10S delivers 1458.1 N at 0.5 MPa in either direction, because both strokes work on the rod-side area. At 0.7 MPa that rises to 2041.3 N each way, with a peak of 297.4 kgf at 1.0 MPa. Twin guide rods on the yoke stop the tooling from rotating and take side load, so a plate or gripper stays square without an external guide.
The 63 mm bore sits in the short ISO 21287 compact body, which saves about 50% of the mounting length of an ISO 15552 profile cylinder - useful inside tight machine frames and gantries. The hard-anodized aluminium body carries an S45C hard-chrome rod, a fixed TPU bumper decelerates at each end, and the fitted -S magnet lets CMSE / DMSE switches report position.
Airtac TACED Guided Compact Cylinder TACED63X10S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X10S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X10S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X10S Is Used
Fixture clamping in tight machining cells
A short 10 mm stroke with 1458.1 N in both directions clamps and releases a machining fixture inside a crowded CNC enclosure where a full-length profile cylinder will not fit.
Push-pull indexing on assembly lines
Equal force both ways makes the double-rod design ideal for advancing and retracting a pallet stop or indexing pin on an electronics assembly line, with the twin guide yoke keeping the tooling square.
Position-verified ejection on packaging lines
The fitted -S magnet and CMSE / DMSE switches confirm extend and retract on a carton ejection arm, while the compact body mounts between conveyor guard rails.
Is the Airtac TACED Guided Compact Cylinder TACED63X10S the Right Cylinder?
For a 10 mm stroke needing about 1458 N both ways, the 63 mm bore is the right class: the 50 mm bore gives only 881.2 N at 0.5 MPa, while stepping up to the 80 mm bore costs space for 2356.2 N you may not need. Strokes up to 250 mm are standard on bore 63, so 10 mm is a stock length. Air supply is 0.15-1.0 MPa (22-145 psi) and speed runs 30-500 mm/s. The rod end is a female M10x1.5 thread on a PT ported body, FB flange mounting is available, and this model already carries the -S magnet for CMSE / DMSE switches. Remember it does not hold position if air is lost - add a rod lock or pilot check valve for a held load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X10S FAQ
Yes - a rod exits both covers, so both strokes act on the rod-side area. Output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal in extend and retract, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 63 mm bore takes a 1/8" PT port with a female M10x1.5 rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow machine frames, and FB flange mounting is offered. A fixed TPU bumper at each end absorbs end-of-stroke energy. Because this model carries the optional -S magnet, CMSE / DMSE reed or solid-state switches can be mounted directly on the body slots for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.