Airtac TACED Guided Compact Cylinder TACED63X15
The AirTAC TACED Guided Compact Cylinder TACED63X15 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 15mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X15
Double acting and double rod, the TACED63X15 pushes a 63 mm bore through a short 15 mm stroke with equal 1458.1 N output in both directions, because a rod leaves each cover and both sides of the piston see the rod-side area. At 0.7 MPa the same twin-rod pack delivers 2041.3 N either way, topping out at 297.4 kgf. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore class slots into tight jigs, guarding and gantry frames. The hard-anodized aluminium body carries a roller-burnished bore, the S45C rod is hard-chrome plated, and fixed TPU bumpers absorb end-of-stroke shock. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the rod end is a female M10x1.5 thread.
Airtac TACED Guided Compact Cylinder TACED63X15 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X15 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X15
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X15 Is Used
Short-stroke press plate
The equal 1458.1 N output both ways suits a 15 mm clinch or stamping pad on an electronics assembly line, where the twin guide yoke keeps the plate square under side load.
Packaging line stopper
A 15 mm rise-and-fall stop on a bottling conveyor uses the compact body to fit under guarding, with about 875 N of usable force at 0.5 MPa holding cartons in sequence.
Is the Airtac TACED Guided Compact Cylinder TACED63X15 the Right Cylinder?
At 1458.1 N per side, bore 63 sits between the 50 mm frame (881.2 N) and the 80 mm frame (2356.2 N), so pick 63 when 50 is under-rated but 80 is oversized for the 15 mm travel. The 15 mm stroke is well inside the 250 mm standard range for this bore, so it ships as a catalog item. Remember the piston drifts when air is lost - for a held load add a rod lock or pilot check valve. This version has no magnet fitted; order the -S code if you need CMSE / DMSE switch positions, and specify FB flange or CA/CB/CR/FTC mounts with PT ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X15 FAQ
Because it is a double-rod cylinder, output is identical pushing and pulling: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa in either direction, with a maximum of 297.4 kgf at 1.0 MPa. Both strokes run on the rod-side area, so no direction is weaker. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 15 mm stroke sits well inside the 250 mm standard limit for bore 63.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 63 mm bore fits shallow fixtures where a full-length body will not. Position sensing needs the optional -S magnet ordered with the cylinder; with -S fitted, CMSE reed or DMSE solid-state switches clamp into the body slots. This unit has no magnet, so no switch will read on it. Ends are decelerated by fixed TPU bumpers, and mounting choices are FB flange or CA/CB/CR/FTC.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.