Airtac TACED Guided Compact Cylinder TACED63X20S
The AirTAC TACED Guided Compact Cylinder TACED63X20S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 20mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke20 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X20S
A double acting, double-rod compact cylinder built to ISO 21287, the TACED63X20S pushes a 16 mm rod out of both covers, so the 63 mm bore delivers 1458.1 N at 0.5 MPa in each direction - the rod-side area is identical on both sides. Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or press plate square without an external guide.
The hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so it slots into tight jigs and gantries. This -S model carries the optional magnet, so CMSE / DMSE reed or solid-state switches can be clipped on for end-of-stroke sensing. A fixed TPU bumper at each end absorbs end-of-stroke shock.
Airtac TACED Guided Compact Cylinder TACED63X20S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X20S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 20 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X20S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X20S Is Used
Symmetric clamp fixture
The equal 1458.1 N force in both directions clamps and releases a machined housing with identical pressure on a CNC fixture plate, with the twin guide yoke keeping the clamp shoe square.
Bi-directional pusher
On a bottling line transfer station, the double rod pushes trays forward and retracts with the same 1458.1 N, while CMSE switches on the -S magnet confirm each completed stroke.
Is the Airtac TACED Guided Compact Cylinder TACED63X20S the Right Cylinder?
At 1458.1 N per side at 0.5 MPa, the 63 mm bore suits clamping and lifting in the 100-200 kg class; step down to the 50 mm bore (881.2 N) for lighter tooling or up to the 80 mm bore (2356.2 N) when the part is heavier. The 20 mm stroke is a standard stroke for this bore. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay held. The female M10x1.5 rod thread on the yoke takes standard tooling, FB flange mounting is available, and the fitted -S magnet enables CMSE / DMSE switch position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X20S FAQ
Yes - the double-rod design means a rod exits both covers, so both strokes act on the rod-side area. Force is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal in extend and retract, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
The S in TACED63X20S means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches mount directly in the body slots for end-of-stroke or mid-stroke signals. Mounting is via the FB flange option; the 1/8" port thread is PT as standard (G available). The fixed TPU bumpers at both ends only decelerate the piston at stroke ends - the cylinder does not lock or hold a load if air pressure is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.