Airtac TACED Guided Compact Cylinder TACED63X35S
The AirTAC TACED Guided Compact Cylinder TACED63X35S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X35S
Double acting and double rod, the TACED63X35S pushes with 1458.1 N and pulls with the same 1458.1 N at 0.5 MPa, because a rod exits both covers and every stroke works on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The 63 mm bore sits in a hard-anodized aluminium body with an S45C hard-chrome plated rod and a fixed TPU bumper at each end.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this cylinder fits tight jigs, guards and gantries. The -S code on this model means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be mounted anywhere along the body slots.
Airtac TACED Guided Compact Cylinder TACED63X35S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X35S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X35S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X35S Is Used
CNC fixture clamping
The equal 1458.1 N force in both directions clamps and releases a machining fixture with identical grip, while the twin guide rods keep the clamp plate square to the part.
Packaging line pusher
A 35 mm stroke is enough to kick cartons off a conveyor lane, and the non-rotating yoke keeps the pusher face parallel to the belt at 30-500 mm/s.
Test rig load cycling
Symmetric rod-side force both ways suits a laboratory fatigue rig that pushes and pulls a specimen alternately, with CMSE switches marking end positions via the -S magnet.
Is the Airtac TACED Guided Compact Cylinder TACED63X35S the Right Cylinder?
At 63 mm bore you get 1458.1 N both ways at 0.5 MPa and 2041.3 N at 0.7 MPa, with a maximum force of 297.4 kgf at 1.0 MPa. If your load needs less than about 881 N, the 50 mm bore TACED50 covers it; if you need over 1458 N, step up to the 80 mm bore at 2356.2 N. The 35 mm stroke is well inside the standard range for this bore, so no made-to-order stroke is needed. Remember the piston drifts if air is lost - for a held load add a rod lock or pilot check valve. This model already carries the -S magnet and the female M10x1.5 rod thread, with FB flange, CA, CB, CR or FTC mounting and PT or G ports to choose from.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X35S FAQ
Yes - the double-rod design means a rod exits both covers, so both strokes work on the rod-side area. Output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal in push and pull, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/8" port depends only on the 63 mm bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the cylinder fits where a full-length body cannot. The S in TACED63X35S means the optional -S magnet is fitted, letting you slide CMSE or DMSE reed or solid-state switches along the body slots for end-of-stroke or mid-stroke sensing. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FB flange, CA, CB, CR or FTC mounting options cover most installations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.