Airtac TACED Guided Compact Cylinder TACED63X45
The AirTAC Airtac TACED Guided Compact Cylinder TACED63X45 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 45mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke45 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X45
A double acting compact cylinder built to ISO 21287, the TACED63X45 pushes a 63 mm bore through a 45 mm stroke with a rod leaving both covers, so the output is 1458.1 N at 0.5 MPa in either direction - the rod-side area works both ways. Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or plate square without an external guide.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and gantries. Plan on roughly 875 N of usable work at 0.5 MPa, or about 74 kg of vertical lift with a 2:1 margin. The hard-anodized aluminium body carries a fixed TPU bumper at each end, and the female M10x1.5 rod thread suits standard tooling. Note that the piston drifts if air is lost - add a rod lock or pilot check valve where a load must be held.
Airtac TACED Guided Compact Cylinder TACED63X45 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X45 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X45
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X45 Is Used
CNC fixture clamping
The 1458.1 N both-ways force clamps or releases a machined housing in a 45 mm envelope, with the twin guide yoke keeping the clamp pad square to the fixture.
Packaging line pushers
Equal push and pull at 0.5 MPa lets one cylinder both kick a carton onto the belt and retract it for reject handling, with the TPU bumper quieting each end of the 45 mm stroke.
Battery swap stations
About 74 kg of vertical lift capacity with a 2:1 margin positions EV battery modules between guides, where the non-rotating yoke prevents the lifting plate from twisting.
Is the Airtac TACED Guided Compact Cylinder TACED63X45 the Right Cylinder?
At 1458.1 N per direction at 0.5 MPa, the 63 mm bore sits between the 50 mm bore (881.2 N) and the 80 mm bore (2356.2 N) - step down if your load is under 800 N, step up for heavy clamping. Both strokes and ports stay compact either way. Choose the -S code if you need the optional magnet for CMSE / DMSE switches; without it no sensor can be fitted. FB flange mounting is available, and the 1/8" port keeps plumbing simple. This unit does not hold position on air loss, so spec a rod lock or pilot check valve for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X45 FAQ
Yes - the double rod means a rod exits both covers, so both sides see the rod-side area. Output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal push and pull, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FB flange mounting available. Sensors need the optional -S magnet code: order TACED63X45S and CMSE / DMSE switches can be mounted in the body slots. Without -S there is no magnet and no sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X45
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.