Airtac TACED Guided Compact Cylinder TACED63X45S
The AirTAC TACED Guided Compact Cylinder TACED63X45S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 45mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke45 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X45S
A double acting, double-rod compact cylinder built to ISO 21287, the TACED63X45S pushes a 16 mm rod out of BOTH covers, so its 63 mm bore delivers the same 1458.1 N at 0.5 MPa in either direction - there is no weaker pull side. Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or press plate square without an external guide. The hard-anodized aluminium body is roller-burnished for wear, and the S45C piston rod carries hard-chrome plating.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarded cells. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the fitted -S magnet accepts CMSE / DMSE switches. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).
Airtac TACED Guided Compact Cylinder TACED63X45S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X45S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X45S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X45S Is Used
Symmetric press fitting
The equal 1458.1 N in both directions lets one TACED63X45S press a bushing home on the forward stroke and eject the finished part on the return, with the twin guide yoke keeping the punch square.
Bidirectional conveyor stops
A packaging line stop that must block product from either side uses the through-rod: same force at each end, and the -S magnet plus a DMSE switch flags extend and retract positions.
Pallet-stacker clamp arms
Clamping arms on a warehouse handler stay parallel thanks to the non-rotating twin guide rods, gripping at about 875 N usable force per side at 0.5 MPa without an external guide frame.
Is the Airtac TACED Guided Compact Cylinder TACED63X45S the Right Cylinder?
At 1458.1 N per direction (2041.3 N at 0.7 MPa, up to 297.4 kgf at 1.0 MPa), the 63 mm bore suits mid-duty pick-and-place and pressing where equal force both ways matters. Step down to the 50 mm bore (881.2 N at 0.5 MPa) for lighter clamping, or up to the 80 mm bore (2356.2 N) for heavy tooling. It does not hold position if air is lost - add a rod lock or pilot check valve for a held load. The 45 mm stroke is a standard length, the 1/8" port is fixed by the bore, and the female M10x1.5 rod thread has no male-thread option on the yoke; FB flange, CA, CB, CR and FTC mountings are available.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X45S FAQ
Yes - the double-rod design means a rod exits both covers, so both strokes act on the rod-side area. Output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal extend and retract, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed 30-500 mm/s.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with threaded aluminium covers for easy service. A fixed TPU bumper at each end absorbs end-of-stroke energy. The fitted -S magnet allows CMSE / DMSE reed or solid-state switches for position feedback. FB flange, CA, CB, CR and FTC mountings are offered; note the cylinder drifts if air is lost, so use a rod lock or pilot check valve where a load must stay put.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X45S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.