Airtac TACED Guided Compact Cylinder TACED63X5
The AirTAC TACED Guided Compact Cylinder TACED63X5 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 5mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke5 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X5
The TACED63X5 is a double acting, double rod compact cylinder built to ISO 21287: a 63 mm bore with just a 5 mm stroke, a rod leaving both covers, and twin guide rods on a yoke that stop the tooling rotating. Because both sides see the rod-side area, output force is identical in each direction - 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. The hard-anodized aluminium body carries a fixed TPU bumper at each end, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The 16 mm hard-chrome-plated S45C rod ends in a female M10x1.5 thread, air supply is 0.15-1.0 MPa (22-145 psi) filtered to 40 um, speed runs 30-500 mm/s, and the piston does not hold position if air is lost - add a rod lock or pilot check valve where a load must stay put.
Airtac TACED Guided Compact Cylinder TACED63X5 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X5 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 5 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X5
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X5 Is Used
Short-stroke press stamping
A 5 mm throw is ideal for marking or embossing dies on aluminium enclosures, where the 1458.1 N double-rod force stamps identically on the approach and return stroke.
Clamp fixture on a CNC fixture plate
The twin guide yoke keeps a clamp plate square on a machining-centre fixture, and the compact body tucks into the tight space a full-length profile cylinder would need twice over.
Two-way eject on a packaging line
With a rod exiting both covers, one TACED63X5 pushes cartons off a conveyor left or right with equal 1458.1 N force, replacing two separate cylinders.
Is the Airtac TACED Guided Compact Cylinder TACED63X5 the Right Cylinder?
At 1458.1 N per side, the 63 mm bore sits between the 50 mm bore (881.2 N) and the 80 mm bore (2356.2 N) at 0.5 MPa - step down for lighter clamping, step up for heavy presses. The 5 mm stroke suits short-throw positioning, so confirm the exact envelope from the datasheet before laying out the machine. Mount with the FB flange; there is no rod-thread code on the yoke. This version has no magnet - order the -S code if you need CMSE / DMSE switch detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X5 FAQ
Yes - the double rod means both sides see the rod-side area, so output is equal either way: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 63 mm bore takes a 1/8" port with an M10x1.5 female rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow jigs and guards, while the twin guide rods stop rotation and carry side load. End-of-stroke energy is absorbed by fixed TPU bumpers. Sensors are not possible on this version because no magnet is fitted - order the -S magnet code to enable CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X5
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.