Airtac TACED Guided Compact Cylinder TACED63X50
The AirTAC Airtac TACED Guided Compact Cylinder TACED63X50 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X50
The TACED63X50 is a double acting, double-rod compact cylinder built to ISO 21287: a 63 mm bore pushes and pulls with the same 1458.1 N at 0.5 MPa (2041.3 N at 0.7 MPa) because a rod exits both covers and both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide.
The hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, which is what lets it drop into tight jigs, guards and gantry frames. A fixed TPU bumper at each end absorbs end-of-stroke shock, the S45C hard-chrome rod resists wear, and the female M10x1.5 rod thread takes standard tooling. For sizing: plan on roughly 875 N of real work at 0.5 MPa, and the bore lifts about 74 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED63X50 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X50 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X50
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X50 Is Used
Symmetric press or forming station
Equal 1458.1 N force in both directions suits a stamping or forming head on a fixture line that must press with identical force on the return stroke.
Palletizing gripper carriage
The non-rotating twin guide yoke keeps a box-gripping plate square while lifting about 74 kg vertically with margin, no external guide rails needed.
Pusher on a bottling conveyor
A 50 mm stroke double rod pushes bottles off the line and retracts with the same force, fitting the short space beside the belt where a full-length cylinder will not.
Is the Airtac TACED Guided Compact Cylinder TACED63X50 the Right Cylinder?
At 1458.1 N per direction, the 63 mm bore sits between the 50 mm (881.2 N) and 80 mm (2356.2 N) options - step down for lighter clamping, up for heavy presses. It does not hold position if air is lost, so add a rod lock or pilot check valve for a held load. Mount with the FB flange where a fixed base is needed, and order the optional -S magnet if you want CMSE / DMSE switch sensing; without -S there is no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X50 FAQ
Because it is a double-rod cylinder, force is equal in both directions: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa on the rod-side area, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 63 mm bore uses a 1/8" port with a female M10x1.5 rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Sensing is available only when you order the optional -S magnet code, which then allows CMSE / DMSE switches on the body slots; without -S there is no magnet, so no switch will read.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.