Airtac TACED Guided Compact Cylinder TACED63X50S
The AirTAC TACED Guided Compact Cylinder TACED63X50S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X50S
A double acting, double-rod compact cylinder built to ISO 21287, the TACED63X50S pushes a 16 mm rod out of BOTH covers, so the 63 mm bore delivers 1458.1 N at 0.5 MPa in each direction - the rod-side area is identical on both faces. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The magnet fitted with this -S model lets CMSE / DMSE reed or solid-state switches report position directly on the body.
The hard-anodized aluminium body is roller-burnished for wear, the S45C rod is hard-chrome plated, and a fixed TPU bumper at each end absorbs end-of-stroke shock. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs and gantries. Running on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), it cycles at 30-500 mm/s.
Airtac TACED Guided Compact Cylinder TACED63X50S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X50S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X50S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X50S Is Used
CNC fixture clamping
The equal 1458.1 N force in both directions clamps and releases a machining fixture with identical grip, and the twin guide rods keep the clamp plate square to the datum.
Packaging pusher station
A 50 mm stroke ejects cartons across a conveyor lane at up to 500 mm/s, while the through-rod gives a symmetric push-pull pickoff for a diverter arm.
Lab press and test rig
About 875 N of usable force at 0.5 MPa suits small forming and fatigue test stations, with CMSE switches on the -S magnet confirming top and bottom of stroke.
Is the Airtac TACED Guided Compact Cylinder TACED63X50S the Right Cylinder?
At 1458.1 N per side this 63 mm bore sits mid-range: step down to the 50 mm bore (881.2 N at 0.5 MPa) for lighter clamping, or up to the 80 mm bore (2356.2 N) when the load grows. The 50 mm stroke is a standard stroke for this bore, so no made-to-order build is needed. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay put. The female M10x1.5 rod thread on both ends suits yoke and clevis tooling, and the -S magnet already on board pairs with CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X50S FAQ
Yes - the double-rod design exposes the rod-side area on both faces, so output is equal in each direction: 1458.1 N at 0.5 MPa, 2041.3 N at 0.7 MPa, and up to 297.4 kgf at the 1.0 MPa (145 psi) maximum. Speed range is 30-500 mm/s on air filtered to 40 um.
It is an ISO 21287 compact cylinder with threaded aluminium covers and a hard-anodized body, saving about 50% of the mounting length of an ISO 15552 profile cylinder. Fixed TPU bumpers at each end absorb end-of-stroke energy, FB flange and CA/CB/CR/FTC mountings are available, and this -S model carries the optional magnet so CMSE / DMSE switches can be fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.