Airtac TACED Guided Compact Cylinder TACED63X70S
The AirTAC Airtac TACED Guided Compact Cylinder TACED63X70S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 70mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke70 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X70S
Double acting and double rod, the TACED63X70S pushes a 63 mm piston through a 70 mm stroke with a rod leaving both covers, so the force is identical in each direction: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and take side load, so a gripper or press plate stays square without an external guide. The magnet fitted under the -S code accepts CMSE / DMSE reed or solid-state switches for end-of-stroke signalling.
The hard-anodized aluminium body with an S45C hard-chrome rod is an ISO 21287 compact build that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it drops into tight gantries and guarding. In practice, plan on roughly 874 N (about 89 kg of push) for real work at 0.5 MPa, and for vertical lifts expect about 74 kg with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke shock, ports are 1/8" PT, and speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
Airtac TACED Guided Compact Cylinder TACED63X70S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X70S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X70S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X70S Is Used
Fixture clamping on CNC pallets
Equal 1458.1 N clamping and release force both ways lets one TACED63X70S swing a pallet clamp open and shut inside a compact fixture plate, with the twin guide yoke keeping the clamp jaw from twisting.
Reject pusher on packaging lines
A 70 mm stroke is enough to kick off-spec cartons off a conveyor; the non-rotating yoke keeps the pusher blade square to the belt and CMSE switches (via the fitted -S magnet) confirm each reject.
Gate driver on assembly gantries
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slides between guard rails to drive a sliding gate with about 74 kg of vertical-lift equivalent.
Is the Airtac TACED Guided Compact Cylinder TACED63X70S the Right Cylinder?
At 1458.1 N per direction, this bore sits between the 50 mm frame (881.2 N at 0.5 MPa) and the 80 mm frame (2356.2 N at 0.5 MPa), so choose down if the load is under 800 N and up if you need over 1500 N. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. The female M10x1.5 rod thread on both ends suits yoke-mounted tooling, FB flange mounting keeps the short body rigid, and the -S magnet is already fitted for CMSE / DMSE switch position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X70S FAQ
Yes - the double-rod design puts a rod through both covers, so both strokes act on the rod-side area and the force is equal each way: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/8" PT ports are sized by the 63 mm bore.
The S means the optional -S magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches can be clamped into the body slots for position feedback - without an S code there is no magnet. The ISO 21287 compact body is hard-anodized aluminium with an S45C hard-chrome rod, roughly 50% shorter in mounting length than an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FB flange or CA/CB/CR/FTC mounting choices.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X70S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.