Airtac TACED Guided Compact Cylinder TACED80X10
The AirTAC Airtac TACED Guided Compact Cylinder TACED80X10 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 10mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke10 mm
- Port size1/4"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED80X10
A double acting, double-rod ISO 21287 compact cylinder, the TACED80X10 pushes a 20 mm rod out of both covers so the 80 mm bore delivers 2356.2 N at 0.5 MPa in each direction - rod-side area on both sides means no push/pull imbalance. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a clamping plate stays square without an external guide. The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 10 mm stroke suits tight clamping stations and short-throw presses. A fixed TPU bumper at each end absorbs end-of-stroke energy. For sizing: treat roughly 1414 N (0.6 of the 0.5 MPa rating) as the usable working force, which lifts about 120 kg vertically with a 2:1 margin. The magnet is not fitted on this code - order the optional -S version if you need CMSE / DMSE switch sensing.
Airtac TACED Guided Compact Cylinder TACED80X10 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED80X10 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED80X10
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED80X10 Is Used
Short-stroke press station
The 10 mm throw and 2356.2 N both ways at 0.5 MPa suit a compact crimping or marking head on an electronics assembly line, where the twin guide yoke keeps the punch aligned.
Heavy fixture clamping
Clamps a machined housing in a welding or machining fixture with about 1414 N of usable force, and the non-rotating guide rods stop the clamp pad twisting under side load.
Part ejection from a die
Ejects stamped or moulded parts from a shallow cavity - the short ISO 21287 body fits inside the die shoe where a full-length profile cylinder cannot.
Is the Airtac TACED Guided Compact Cylinder TACED80X10 the Right Cylinder?
At 2356.2 N per direction at 0.5 MPa (3298.7 N at 0.7 MPa, 480.5 kgf max), the 80 mm bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) classes - step down for lighter clamps, up for heavy pressing. The 10 mm stroke is well inside the 300 mm standard range for this bore. Remember the piston drifts when air is lost, so add a rod lock or pilot check valve if a load must stay held. Mounting is FB flange; ports are 1/4" PT and the rod end carries a female M12x1.75 thread. Choose the -S code only if position sensing via CMSE / DMSE switches is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED80X10 FAQ
Yes - the double-rod design exposes rod-side area on both sides, so force is equal each way: 2356.2 N at 0.5 MPa, 3298.7 N at 0.7 MPa, and up to 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, fluid air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures. A fixed TPU bumper at each end absorbs end-of-stroke energy but is not adjustable and never holds a load - the piston drifts if air is lost. Mounting is FB flange, ports are 1/4" PT, and sensing needs the optional -S magnet with CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED80X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.