Airtac TACED Guided Compact Cylinder TACED80X70S
The AirTAC Airtac TACED Guided Compact Cylinder TACED80X70S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 70mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke70 mm
- Port size1/4"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
About the Airtac TACED Guided Compact Cylinder TACED80X70S
A double acting, double-rod ISO 21287 compact cylinder, the TACED80X70S pushes a 20 mm rod out of both covers so the 80 mm bore delivers 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa in either direction - the rod-side area is identical on both sides. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The -S code on this model means the magnet is fitted, and CMSE / DMSE reed or solid-state switches can be clipped into the body slots.
The hard-anodized aluminium body with a roller-burnished bore and an S45C hard-chrome-plated rod shrugs off wear in high-cycle automation, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight gantries and guarding. In practice, plan on roughly 1414 N (about 144 kgf) of usable force at 0.5 MPa, or lift about 120 kg vertically with a 2:1 margin. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, -20 to +70 C.
Airtac TACED Guided Compact Cylinder TACED80X70S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED80X70S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED80X70S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED80X70S Is Used
Symmetric press or riveting head
Equal 2356.2 N output in both directions lets one 80 mm bore press a bushing home on the forward stroke and eject the finished part on the return, with the twin guide yoke keeping the punch square.
Pallet-stacker clamp arm
A through-rod driving clamp arms from the centre gives identical grip force closing or opening, and the non-rotating yoke stops the arms twisting under offset loads in a warehouse line.
Lift-and-lower gauge station
With about 120 kg of vertical lift capacity at a 2:1 margin, the 70 mm stroke raises a 60 kg inspection fixture and lowers it under full control at 30-500 mm/s.
Is the Airtac TACED Guided Compact Cylinder TACED80X70S the Right Cylinder?
At 2356.2 N per side at 0.5 MPa, the 80 mm bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) classes - step down for lighter clamping, up for heavy lift-and-press work. The 70 mm stroke is well inside the standard range for this bore, so no made-to-order build is needed. If the machine must hold position when air is lost, add a rod lock or pilot check valve, because this cylinder drifts without pressure. FB flange mounting suits fixed-face installations, and the fitted -S magnet lets CMSE / DMSE switches report end positions straight away.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED80X70S FAQ
Yes - the double-rod design means a rod exits both covers, so both strokes work on the rod-side area. Output is 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa in either direction, peaking at 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed is 30-500 mm/s.
The S means the optional -S magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches can be mounted in the body slots for end-position signals - without the S code there is no magnet. The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Female rod thread is M12x1.75, the air port is 1/4" PT, and FB flange mounting is available.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED80X70S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.