Airtac TACED Guided Compact Cylinder TACED80X75
The AirTAC Airtac TACED Guided Compact Cylinder TACED80X75 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED80X75
A double acting, double-rod compact cylinder built to ISO 21287, the TACED80X75 pushes a 20 mm rod out of both covers so the 80 mm bore delivers the same 2356.2 N at 0.5 MPa (3298.7 N at 0.7 MPa) in either direction. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The fixed TPU bumper at each end absorbs end-of-stroke energy.
The hard-anodized aluminium body with a roller-burnished bore and S45C hard-chrome plated rod shrugs off wear in daily production. Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight gantries and guarding. Plan on roughly 1414 N of real work at 0.5 MPa, which is about 120 kg of vertical lift with a 2:1 margin. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the female M12x1.75 rod thread takes standard tooling.
Airtac TACED Guided Compact Cylinder TACED80X75 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED80X75 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED80X75
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED80X75 Is Used
Press-fit station on an EV battery assembly line
Equal 2356.2 N force both ways lets one cylinder press a busbar home on the advance stroke and eject the part on the return, with the twin guide yoke keeping the punch square to the fixture.
Gantry pick-and-place over a CNC lathe
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits inside low gantry framing while lifting about 120 kg vertically with a 2:1 margin.
Baling and compaction head in a packaging machine
A 75 mm stroke with 3298.7 N at 0.7 MPa compresses cartons or scrap in a tight frame, and the TPU bumpers soak up the end-of-stroke shock at 500 mm/s.
Is the Airtac TACED Guided Compact Cylinder TACED80X75 the Right Cylinder?
At 2356.2 N per direction at 0.5 MPa, the 80 mm bore suits clamping and pressing where a 63 mm bore (1458.1 N) runs out of force but a 100 mm bore (3769.9 N) is more cylinder than the job needs. Remember the piston drifts if air is lost - add a rod lock or pilot check valve when a load must stay put. The 1/4" port feeds the flow this bore wants at speed. Stroke 75 mm sits inside the standard range for bore 80, and FB flange mounting is available. This version has no magnet, so no CMSE or DMSE switch can be fitted; order the -S code if position sensing is planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED80X75 FAQ
Yes. Because a rod exits both covers, both sides work on the rod-side area, so output is equal either way: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the rod end carries a female M12x1.75 thread.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, roller-burnished bore, S45C hard-chrome plated rod and threaded aluminium covers, with a fixed TPU bumper at each end and FB flange mounting available. This model has no magnet fitted, so no sensor can be mounted; order the -S version to enable CMSE or DMSE switches along the magnet slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED80X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.