Airtac TACED Guided Compact Cylinder TACED80X80
The AirTAC Airtac TACED Guided Compact Cylinder TACED80X80 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
About the Airtac TACED Guided Compact Cylinder TACED80X80
A double acting, double rod ISO 21287 compact cylinder, the TACED80X80 pushes a 20 mm rod out of BOTH covers, so the 80 mm bore delivers 2356.2 N at 0.5 MPa in each direction - the rod-side area is identical either way, with no push/pull mismatch to design around. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and a fixed TPU bumper at each end absorbs end-of-stroke shock.
The hard-anodized aluminium body is roller-burnished for wear life, with an S45C hard-chrome plated rod and threaded aluminium covers for fast service. This short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is what lets it slot into tight gantries and guarding. For sizing: treat roughly 1414 N (about 0.6 of the 2356.2 N rating) as the usable working force at 0.5 MPa, and expect it to lift about 120 kg vertically once a 2:1 margin is applied. Rod end is a female M12x1.75 thread and the port is 1/4" PT.
Airtac TACED Guided Compact Cylinder TACED80X80 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED80X80 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED80X80
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED80X80 Is Used
Double-sided press fixture
The through-rod gives 2356.2 N at both ends of an 80 mm stroke, so one cylinder can clamp or stamp a steel bracket from either side with identical force.
Palletizing lift head
With about 120 kg of vertical lift capacity at a 2:1 margin, the non-rotating twin guide yoke keeps a box-gripping plate level through every cycle on a packaging line.
Bidirectional transfer slide
Equal force in both directions moves heavy machined housings onto a CNC fixture and back off it, with the twin guide rods resisting the side load of the part weight.
Is the Airtac TACED Guided Compact Cylinder TACED80X80 the Right Cylinder?
At 2356.2 N per direction (3298.7 N at 0.7 MPa, up to 480.5 kgf at 1.0 MPa), bore 80 sits between the 63 (1458.1 N at 0.5 MPa) and the 100 (3769.9 N at 0.5 MPa) - step down when the load is under 1400 N of real work, step up for heavy vertical handling. Remember the piston drifts if air is lost; add a rod lock or pilot check valve where a load must be held. Mount with the FB flange, and if you need position feedback, order the -S code - without it there is no magnet and no CMSE / DMSE switch can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED80X80 FAQ
Yes - because a rod exits both covers, both sides work on the rod-side area. Output is 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, equal in each direction, with a maximum of 480.5 kgf at 1.0 MPa. The 80 mm stroke runs at 30-500 mm/s on 0.15-1.0 MPa (22-145 psi) air, and the piston will drift if air is lost, so use a rod lock or pilot check valve for load holding.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to absorb end-of-stroke energy and FB flange mounting available. Position sensing requires the optional -S magnet code: only then can CMSE or DMSE switches be mounted on the body slots. The rod end is female M12x1.75 and the air port is 1/4".
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED80X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.