Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ100X75S
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ100X75S is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø100mm bore, 75mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ100 mm
- Stroke75 mm
- Port sizePT3/8
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ100X75S
The AirTAC TACQ100X75S is a double-acting JIS compact guided cylinder featuring a 100mm bore and 75mm stroke. Two chromed carbon steel guide rods alongside the fixing plate ensure strict non-rotating accuracy of ±0.15°. This integrated architecture drives and guides the load simultaneously, effectively replacing a separate linear rail. Drive output mirrors a standard ACQ body, as the added guides contribute stiffness rather than extra thrust.
At 0.5 MPa it yields 3927N push and 3524.8N pull force, scaling to 5497.8N push at 0.7 MPa, with a maximum push of 801kgf at 1.0 MPa. The unit uses a PT3/8 port and a fixed NBR elastomer bumper at each end for end-of-stroke deceleration. Equipped with an internal piston magnet, the S suffix enables compatibility with both reed and electronic solid-state switches for precise position sensing.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ100X75S Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ100X75S |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ100X75S
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ100X75S Is Used
Heavy Press Assembly
Applies concentrated downward force for bearing insertion or riveting on large machinery, utilizing the twin guide rods to resist off-center loads.
Pallet Stopper Gate
Acts as a robust physical stop for heavy pallets on packaging lines, relying on the chromed guide rods to maintain precise alignment under impact.
Large Component Transfer
Lifts and positions heavy metal castings between machining centers, where the ±0.15° non-rotating tolerance prevents part misalignment during pick-and-place.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ100X75S the Right Cylinder?
When sizing this 100mm bore unit, consider the adjacent options: a 80mm bore provides 2513.2N push at 0.5 MPa, while this 100mm unit delivers 3927N. If your application lacks lateral load or anti-rotation requirements, a plain ACQ cylinder suffices. Conversely, applications needing equal force on both strokes are better served by a double-rod ACQD. Ensure the 75mm stroke is within the 100mm maximum limit. Verify that your mass and speed parameters align with the 0.5 MPa chart, and confirm the allowable reverse torque from the official datasheet. Specify the 100mm bore, 75mm stroke, S magnet, and PT3/8 thread when ordering.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ100X75S FAQ
It generates 3927N push and 3524.8N pull at 0.5 MPa, 5497.8N push at 0.7 MPa, and a maximum push of 801kgf at 1.0 MPa. The twin guide rods provide a non-rotating tolerance of ±0.15°. The standard stroke limit for this 100mm bore is 100mm.
No, a standard ACQ-type cylinder drifts when air is lost or valves are centered; the fixed elastomer bumper only decelerates near stroke end. For fail-safe holding, use an external rod lock or pilot-operated check valve. Also, ensure applied external force is concentric with the rod, and confirm the maximum reverse torque limit from the datasheet, as it decreases with stroke length.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ100X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.