Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X35
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X35 is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø25mm bore, 35mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ25 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X35
The AirTAC TACQ25X35 is a double-acting JIS compact guided cylinder integrating two stainless steel guide rods and a fixing plate with a 25mm bore body. By driving and guiding in a single unit, it replaces a separate linear guide. The twin rods ensure non-rotating accuracy of ±0.15° at the retracted position, handling lateral loads that a plain compact rod cannot manage.
Drive force equals a standard ACQ of the same bore, as the guides add stiffness rather than thrust. At 0.5 MPa it provides 245.4 N push and 188.9 N pull force, rising to 343.6 N push at 0.7 MPa. End-of-stroke deceleration relies on a fixed elastomer TPU bumper, not an adjustable air cushion. Note that this specific model ships without a magnet, though the body retains sensor grooves for future upgrades.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X35 Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X35 |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø25 mm |
| Stroke | 35 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 189 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X35
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 25 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X35 Is Used
Pick-and-Place Head
Drives a small gripper on an electronics assembly machine, ensuring the twin guide rods keep the component perfectly aligned during vertical placement without lateral drift.
Sensor Slide
Positions a vision camera over a moving conveyor belt, leveraging the ±0.15° non-rotating tolerance to maintain precise optical inspection angles.
Pallet Stopper Gate
Acts as a rising stop on a packaging line, using the integrated fixing plate to halt pallets while absorbing lateral side forces from the moving conveyor.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X35 the Right Cylinder?
Selecting this 25mm bore with a 35mm stroke is ideal when your application requires exact non-rotating control within a 50mm maximum stroke envelope. If 245.4 N push at 0.5 MPa is insufficient, step up to the 32mm bore (402.1 N push); if excessive, step down to the 20mm bore (157.1 N push). A plain ACQ fits purely linear loads without anti-rotation needs, while a double-rod ACQD suits higher torque requirements. Confirm ordering essentials: 25mm bore, 35mm stroke, PT port thread, and no magnet. Always verify lateral load and reverse torque limits, which decrease with stroke length—confirm the exact allowable reverse torque from the datasheet. Do not apply reverse torque above this limit, and apply external force concentric with the rod.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X35 FAQ
The 25mm bore generates 245.4 N push and 188.9 N pull at 0.5 MPa, 343.6 N push at 0.7 MPa, with a maximum push of 50 kgf at 1.0 MPa. It features an M5x0.8 port, an M6x1.0 female rod-end thread, a maximum standard stroke of 50 mm, and a non-rotating tolerance of ±0.15°.
Two stainless steel guide rods carry lateral loads but do not hold the load on air loss; the rod drifts and a fixed elastomer bumper only decelerates near stroke end, so use an external rod lock for fail-safe holding. Maximum allowable reverse torque decreases with stroke length—treat it as an order-of-magnitude guide and confirm the exact value from the datasheet. This model ships without a sensor magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.