Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35 is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø32mm bore, 35mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ32 mm
- Stroke35 mm
- Port sizePT1/8
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35
The AirTAC TACQ32X35 is a double-acting JIS compact guided cylinder featuring two stainless steel guide rods and a fixing plate. This design drives and guides a load simultaneously, eliminating the need for a separate linear guide. At 32mm bore, the platform holds a non-rotating tolerance of ±0.15° and manages lateral loads that a plain compact rod cannot support.
Drive force equals a standard ACQ of the same size, as the twin rods add stiffness rather than thrust. It generates 402.1N push and 301.6N pull at 0.5MPa, with a 562.9N push at 0.7MPa. The unit uses a PT1/8 port, an M8x1.25 female rod-end thread, and fixed elastomer bumpers for end-of-stroke deceleration.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35 Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35 |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35 Is Used
Pick-and-Place Head
Ideal for transferring electronic components where the ±0.15° non-rotating accuracy prevents yaw during vertical descent and grip release.
Sensor Camera Slide
Positions inspection cameras over a moving conveyor, using the twin guide rods to maintain strict lateral stability against sudden stops.
Pallet Stopper Gate
Functions as a robust physical stop on packaging lines, absorbing side impacts via the guide rods rather than bending the primary piston.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35 the Right Cylinder?
When sizing this 32mm bore unit, consider the neighbouring bores: a 25mm cylinder yields 245.4N push, while a 40mm provides 628.3N at 0.5MPa. If your application only requires pure linear thrust without anti-rotation constraints, a plain ACQ suffices. For symmetrical thrust from both sides, a double-rod ACQD is preferable. Confirm ordering essentials including the 35mm stroke (max 100mm), PT thread, and note this specific model ships without a magnet. Always verify lateral load and reverse torque limits against the 0.5MPa charts, ensuring external forces remain concentric with the rod.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35 FAQ
This 32mm bore cylinder provides 402.1N push and 301.6N pull at 0.5MPa, and 562.9N push at 0.7MPa. The maximum push is 82kgf at 1.0MPa. It features a 35mm stroke (the maximum standard stroke for this bore is 100mm) and a non-rotating tolerance of ±0.15°.
It uses fixed NBR elastomer bumpers for deceleration rather than adjustable air cushions. The maximum allowable reverse torque decreases as stroke extends; for a 32mm bore, it drops from roughly 0.66N·m at 5mm to 0.20N·m at 100mm. Treat this as an order-of-magnitude guide and confirm the exact value from the datasheet. Never apply reverse torque above this limit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.