Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35S
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35S is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø32mm bore, 35mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ32 mm
- Stroke35 mm
- Port sizePT1/8
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35S
The AirTAC TACQ32X35S is a double-acting JIS compact guided cylinder featuring a 32mm bore and 35mm stroke. Two stainless steel guide rods and a fixing plate ensure non-rotating accuracy of ±0.15°, carrying lateral loads that a plain rod cannot. This integrated drive-and-guide unit eliminates the need for a separate linear guide.
Drive force equals a standard ACQ of the same bore, delivering 402.1N push and 301.6N pull at 0.5MPa, since the guides add stiffness rather than thrust. It includes a built-in magnet (-S) compatible with reed or solid-state switches, fixed NBR elastomer bumpers, and a PT1/8 port. Maximum reverse torque decreases with stroke length, so confirm exact limits from the datasheet.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35S Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35S |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35S
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35S Is Used
Pick-and-Place Head
Drives a small gripper on an assembly line, maintaining strict parallelism via the twin guide rods during component transfer.
Sensor Camera Slide
Positions a vision system inspection head with ±0.15° non-rotating tolerance to keep the lens perfectly aligned over moving parts.
Pallet Stopper Gate
Acts as a rigid stop mechanism on a conveyor, absorbing side-impact forces and halting work-holders without twisting.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35S the Right Cylinder?
This 32mm bore provides 402.1N push at 0.5MPa. Stepping down to a 25mm bore yields 245.4N, while a 40mm bore offers 628.3N. Choose a plain ACQ if lateral load support is unnecessary, or an ACQD double-rod cylinder if symmetrical pulling force is required. Verify your stroke does not exceed the 100mm maximum. Ensure external loads remain concentric with the rod and that reverse torque stays below the allowable charted limit.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35S FAQ
It delivers 402.1N push and 301.6N pull at 0.5MPa, and 562.9N push at 0.7MPa, with a maximum push capacity of 82kgf at 1.0MPa. The maximum standard stroke for a 32mm bore is 100mm. Twin guide rods ensure a non-rotating tolerance of ±0.15°.
No, the cylinder drifts on air loss because the fixed NBR bumpers only decelerate near stroke ends. For fail-safe holding, use an external rod lock or pilot-operated check valve. Also, ensure applied reverse torque does not exceed the charted limit; consult the datasheet for exact values at this stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.