The AirTAC GC200-06C2K AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200-06C2K is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package for compressed air. This 200-size unit is configured for PT1/8 ports, filters to the standard 40 um grade, drains its filter bowl by differential pressure, regulates 0.15-0.9 MPa (20-130 psi) with a round psi gauge fitted, includes a reverse/check valve, and ships with a mounting bracket. The bowl is polycarbonate (PC).
This is a genuine AirTAC part. The GC line is available in 200/300/400/600 sizes with port options from 1/8 in to 1 in, PT standard thread plus G and NPT order options, manual or automatic drain choices, a 5 um filter grade (code W), and gauge scale choices. Flow is published as curves rather than a single rated figure, so we confirm datasheet figures on request.
| Model | GC200-06C2K AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the gripper and cylinder circuits of a small pick-and-place cell, where the 40 um grade protects valve spools and the check valve holds the circuit against backflow.
Supplies the sealing jaws and clamp cylinders on a cartoning or wrapping line, keeping the air train compact at the machine frame with the included bracket while the psi gauge lets operators set line pressure directly.
Conditions the air at a maintenance bench or assembly station where hand tools run continuously: the lubricator mists oil into the tool supply, the regulator holds a steady setting, and the differential-pressure drain clears accumulated water.
Size and port step up together across the GC range (200/300/400/600, 1/8 in to 1 in), so pick the size whose flow curve covers your demand rather than matching port threads alone. Drain type is a real choice: differential-pressure (this unit), automatic (code A) for unattended drains, or manual (code M) where you want operator control. Filter grade is 40 um standard or 5 um with code W; the gauge can be ordered in MPa, psi or bar scales, and thread is PT standard with G and NPT available to order.
Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote one number. Send us your line pressure and air demand and we will confirm the sizing against the datasheet curves on request before you order.
A blank drain code means the filter bowl drains by differential pressure, which suits normal duty without operator attention. If your application needs unattended automatic draining or deliberate manual draining, the same GC200 unit can be ordered with drain code A (automatic) or M (manual).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.