The AirTAC GC200-08MLF2 AirTAC F.R.L. Combination, PT1/4, Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC200-08MLF2 is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one set, giving a 1/4 in (PT1/4) compressed-air line filtration, pressure regulation and oil-mist lubrication in a single installation. This configuration carries the standard 40 um filter element, a manual drain on the filter bowl, a low-pressure type regulator, and a fitted square pressure gauge reading in psi. The polycarbonate bowls suit general indoor compressed-air service, and the set includes a mounting bracket.
This is a genuine AirTAC part. The GC series is offered in sizes 200, 300, 400 and 600 with a choice of ports, thread forms (PT standard, with G and NPT available as order options), drain types, filter grades and gauge scales, so a matching unit can be configured for most plant air drops. Flow figures are published as curves rather than a single rating; ask us and we will confirm the datasheet figures for your application on request.
| Model | GC200-08MLF2 AirTAC F.R.L. Combination, PT1/4, Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Installed at the take-off point of a factory compressed-air header, the set cleans water and particulate from the air, holds a steady low set pressure for downstream equipment, and feeds oil mist to air-operated devices on that drop.
At a bench where technicians run impact drivers, ratchets and other air tools, the combination supplies filtered, pressure-regulated and lubricated air, which is the feed condition those tools are designed to run on.
Feeding the air cylinders and actuators on a packaging or cartoning line, the unit removes condensate and debris, keeps the supply pressure stable at the machine's set point, and lubricates the actuator air on a continuous basis.
Start with the port step: this unit is size 200 with a 1/4 in PT port, so check it against the line size and the air demand of the equipment it will serve. Choose the drain to suit access: manual drain (as fitted here) needs periodic draining by hand, while automatic and differential-pressure drains are available on other codes. The standard element is 40 um; a 5 um grade (code W) is available if finer particulate removal is needed. The fitted square gauge reads in psi, and MPa or bar scales plus an external round gauge are alternatives. Thread is PT as standard; G (BSPP) and NPT are catalogue options to order. Note this is the low-pressure regulator type, intended for circuits set below standard regulator range; the exact adjustment range is not published, so confirm it with us before ordering. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a rated flow number. Send us your line pressure and the air demand of your equipment, and we will confirm the relevant datasheet figures for this exact model on request.
The M in the code specifies a manual drain on the filter bowl: condensate collects in the polycarbonate bowl and is drained by hand, which suits attended installations; automatic and differential-pressure drains are available on other codes. The L specifies the low-pressure regulator type, intended for circuits set below the standard regulator range; the exact adjustment range is not published, so confirm it with us before ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.