The AirTAC GC20006F2G AirTAC F.R.L. Combination Unit G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC20006F2G is a three-piece F.R.L. combination that filters, regulates and lubricates compressed air in one assembly: a separate filter with a 40 um element and differential-pressure drain, a standard regulator with an embedded square psi gauge, and a lubricator for oil-mist delivery to downstream equipment. This configuration is built with a G1/8 (1/8 in) G-thread port, carries a maximum inlet pressure of 1.0 MPa (145 psi), and operates from -5 to 70 C (non-freezing). The filter and lubricator bowls on this size are polycarbonate (PC).
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, and options include automatic or manual drains, a 5 um filter element (code W), gauge scale in MPa, psi or bar, G or NPT threads, and a reverse/check valve. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC20006F2G AirTAC F.R.L. Combination Unit G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding impact wrenches and nutrunners at assembly stations: the filter removes water and particulate, the regulator holds a steady setting, and the lubricator keeps tool motors running smoothly through the shift.
Supplying carton-forming and case-sealing cylinders on a packaging conveyor, where clean, regulated and lubricated air keeps seals consistent and cylinder seals from drying out.
Providing conditioned air to pneumatic workholding clamps on a machining centre, where a stable regulated pressure protects clamping force and the filter keeps moisture out of the fixture circuit.
Size and port are the first choice: the 200 size with its 1/8 in G1/8 port suits compact supply runs, while larger sizes (300/400/600) step up the port and the flow capacity. Because flow is published as curves rather than one rated number, ask us to confirm sizing against your application before ordering. Other decodable choices on this family: drain type (differential-pressure as here, or automatic or manual), filter grade (40 um standard, 5 um with code W), gauge scale (this unit is square, psi; MPa and bar scales exist), thread (PT is the standard; G and NPT are orderable options), and bracket mounting (included on this unit).
For the regulator, the standard type covers 0.15-0.9 MPa (20-130 psi) with this differential-pressure drain configuration. If your line needs finer water removal, specify the 5 um element; if unattended draining matters, compare the automatic drain option. We confirm the full datasheet on request.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a rated flow number. Send us your application details and we will confirm the flow and sizing figures from the datasheet on request.
The GC20006F2G is decoded with a G1/8 (1/8 in) port in G (BSPP) thread. PT is the standard thread for the series, and G and NPT are catalogue options you can order. State the thread you need when ordering so the unit matches your piping.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.