The AirTAC GC20006F2GK AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC200 series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, assembled as one unit so the air is cleaned, regulated and lubricated in a single installation point. This GC20006F2GK is built with G1/8 ports, the standard 40 um filter element, a differential-pressure drain on the filter bowl, an embedded square gauge reading in psi, a reverse/check valve fitted on the regulator, and a mounting bracket included. The polycarbonate bowls let you see the condensate and oil level at a glance.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port options from 1/8 to 1 inch, a choice of drain type, 40 um or 5 um (W) filtration, gauge scale, thread form and check-valve options. Flow figures for this series are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC20006F2GK AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding clean, regulated, lubricated air to the cylinders and actuators on a carton-forming or wrapping line, with the 40 um element catching water and pipe scale before they reach the valves.
Supplying a bench-mounted pneumatic clamping or light press station, where the regulator holds a steady working pressure and the lubricator carries oil mist to the cylinder seals.
Conditioning the air for conveyor blow-off nozzles and jet manifolds, keeping moisture and particulates out of the nozzles while the check valve holds the regulator setting.
Start with the port and size step: this unit is the 200 size with G1/8 ports, the smallest step in the range, so match it to the line size and the air demand of the downstream equipment. Because flow is published as curves rather than one rated figure, ask us to check the curve against your application before ordering. The standard 40 um element suits general-purpose air; choose the 5 um (W) grade when finer particulate removal is needed. The differential-pressure drain flushes the filter bowl automatically as the pressure drop across the element builds; if you prefer scheduled manual draining or fully automatic draining, those variants can be selected. The square gauge here reads in psi, and MPa or bar scales are available, as is an external round gauge. The trailing G in the code specifies G (BSPP) threads; PT is the standard thread and NPT is also a catalogue option. A mounting bracket is included with this unit.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as performance curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure and the air demand of your equipment and we will confirm the flow from the datasheet curve and check that the 200 size with G1/8 ports is correctly sized before you order.
This unit's filter bowl uses a differential-pressure drain: as the 40 um element loads with contaminant and the pressure drop across it rises, the drain automatically purges collected condensate, so no manual draining is needed in normal service. If your duty cycle suits scheduled manual draining or fully automatic draining instead, those drain options are available in the GC range - just ask us to quote the variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.