The AirTAC GC20006F2K AirTAC F.R.L. Combination PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006F2K is a three-piece AirTAC GC-series F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one supply unit. This configuration is the size 200 (GC200) with 1/8 in PT ports, a 40 um filter element, a differential-pressure drain on the filter bowl, a standard regulator with an embedded square psi gauge, a reverse/check valve fitted after the regulator, and PC (polycarbonate) bowls. In use it cleans water and particulate from the compressed air, holds a set downstream pressure, and adds a fine oil mist for downstream pneumatic components.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and with choices of drain type, 5 um (W) or 40 um filtration, gauge scale, thread form and check valve. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC20006F2K AirTAC F.R.L. Combination PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds cleaned, regulated and lubricated air to the gripper and pusher cylinders on a bottling line, with the psi gauge letting operators set and check line pressure at a glance.
Serves as the point-of-use supply unit on an assembly conveyor, filtering condensate and swarf from the shop air, holding a stable pressure for the stopper and clamp cylinders, and oil-misting the valves they run through.
Prepares the air feeding impact wrenches and ratchets at a service bay: the 40 um filter and differential drain keep water out of the tools, the regulator caps working pressure, and the lubricator carries oil mist into the tool motors.
Start with the port step: the GC200 carries 1/8 in ports, and the family steps up through 300, 400 and 600 to 1 in, so pick the size whose flow curve covers your demand. Choose the drain: differential-pressure (this unit), automatic (A) or manual (M). Choose the filter grade: 40 um standard or 5 um with code W. Pick the gauge scale (MPa, psi or bar) and whether a reverse/check valve (K) is needed. Thread is PT as standard; G (BSPP) and NPT are catalogue options to order. A mounting bracket is included.
Because flow is published as curves and not as a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and we will confirm the flow curve and correct size from the datasheet on request.
This unit's filter bowl uses a differential-pressure drain, which bleeds collected condensate automatically when the pressure difference across the element is high enough. If you prefer a fully automatic float drain, order code A; if you want to drain by hand, order code M. The regulation range differs by drain type: 0.15-0.9 MPa (20-130 psi) with the automatic or differential-pressure drain, and 0.05-0.9 MPa (7-130 psi) with the manual drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.