The AirTAC GC20006LC2 AirTAC F.R.L. Unit, PT1/8, Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006LC2 is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one complete air-treatment set. This configuration is size 200 with a PT1/8 (1/8 in) port, PT thread, 40 um standard filtration, a differential-pressure drain on the filter bowl, and the low-pressure regulator type. A round gauge with a psi scale is fitted, and a mounting bracket is included. It treats compressed air in one pass: water and particulate are drained from the filter bowl, downstream pressure is set on the regulator, and oil mist is metered to the air line to lubricate downstream equipment.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of port sizes, PT, G or NPT threads, differential-pressure, automatic or manual drains, 40 um or 5 um (W) filter grades, and gauge scale options. Full rated flow figures are published as curves rather than a single number, so ask us to confirm the datasheet and sizing for your application.
| Model | GC20006LC2 AirTAC F.R.L. Unit, PT1/8, Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Mounted at the machine inlet on a small-bore PT1/8 supply line, the unit filters condensed water and swarf-laden particulate from shop air, holds a stable low regulated pressure to the machine's pneumatic circuits, and meters oil mist to spindle and tool-change actuators.
On a packaging line's carton-forming and sealing station, the combination conditions the air feeding directional valves and small cylinders: the filter drains carry-over moisture, the low-pressure regulator sets the working pressure for delicate sealing jaws, and the lubricator keeps valve spools and cylinder seals running smoothly.
Feeding benchtop lab automation and sample-handling pneumatics, the unit supplies clean, pressure-controlled and lubricated air at low regulated settings from a small PT1/8 line, protecting sensitive grippers and micro-cylinders from moisture, dirt and dry-running.
Start with the size and port step: 200 is the smallest GC size, and the PT1/8 port suits compact supply lines - step up to 300, 400 or 600 where the line and required flow are larger. The drain choice matters in use: this unit has the differential-pressure drain (the default), while automatic (A) and manual (M) drains are orderable variants. Filtration is the 40 um standard grade; specify the W code for 5 um where finer particle removal is needed. The fitted gauge here is the external round type with a psi scale; embedded square gauges with MPa, psi or bar scales are the standard alternative. Thread is PT as standard, with G (BSPP) and NPT as orderable options.
Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for this series as performance curves rather than a single rated number, so we do not quote a rated flow figure. Send us your application details and we will confirm the flow data from the datasheet and check the sizing against your line before you order.
The L in the code marks the low-pressure regulator type, intended for applications where the working pressure must be set below the standard range. The exact adjustment range for the low-pressure type is not published in our current data, so ask us to confirm it from the datasheet for your set pressure. Note this unit is fitted with a round gauge on a psi scale for setting and monitoring.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.