The AirTAC GC20006LC2K AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006LC2K is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set, so one connection point cleans the air, holds a set downstream pressure and adds lubricating mist for the tools and cylinders fed from it. This unit is built on the size 200 body with PT1/8 (1/8 in) PT ports. The filter section carries the standard 40 um element with a differential-pressure drain, the regulator is the low-pressure type, and the round pressure gauge fitted to this code reads in psi. A reverse/check valve is fitted, and the mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, thread options (PT standard, G and NPT to order), drain types, 5 um filtration (code W), gauge style and scale, and reverse/check valve. Flow figures are published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC20006LC2K AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding a bench-top pneumatic press or clamping fixture: the filter removes water and chips from the shop air, the low-pressure regulator holds a steady setting for consistent clamping force, and the lubricator mists the cylinder seals through every stroke.
Supplying the pick-and-place and sealing cylinders on a packaging conveyor: clean, regulated and lubricated air keeps the small-bore actuators cycling smoothly, while the check valve holds the set pressure if the main supply dips.
Feeding a manifold that serves air screwdrivers, riveters and blow guns at an assembly bench: one GC set conditions the whole branch, protecting the tools from moisture and debris and keeping them oiled during shift-long use.
Start with the port and size step: this code is size 200 with PT1/8 ports; step up to 300, 400 or 600 when the line needs a larger port and more capacity. Choose the drain type where it applies - differential-pressure (this code), automatic (A) or manual (M). Pick the filter grade: 40 um standard here, or 5 um with code W. Select the gauge style and scale (square embedded or round external; MPa, psi or bar) - this code carries a round gauge reading psi. Choose PT, G (BSPP) or NPT thread to match your piping, and note the bracket is included with this code while J removes it on the individual units. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so no single number is quoted here. Tell us your line pressure, downstream pressure setting and the equipment you are feeding, and we will confirm the flow and sizing from the datasheet on request before you order.
The GC series normally carries an embedded square gauge, and an external round gauge is a catalogue option. This code specifies the round gauge with a psi scale, so the regulator setting is read directly in psi without conversion; MPa and bar scales are available on other codes if your plant standardises on those units.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.