The AirTAC GC20006LF2WG AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, assembled as one air-treatment set. This configuration, GC20006LF2WG, is the 200 size with a G1/8 (1/8 in) G-thread port. The filter element is the fine 5 um grade (code W) with a differential-pressure drain, the regulator is the low-pressure (L) type, and a square gauge scaled in psi is fitted so the set pressure can be read directly. A mounting bracket is included.
This is a genuine AirTAC part. The GC series spans the 200, 300, 400 and 600 sizes with ports stepping up from 1/8 in to 1 in, and each element of the set can be ordered with different drains, filter grades, gauge scales and thread types (PT is the standard; G and NPT are catalogue options). Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow figures are published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC20006LF2WG AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the pneumatic clamps, tool-change cylinders and purge jets on a compact machining centre, with the 5 um element protecting fine valves from particulate carry-over.
Conditions the air feeding carton-sealing and wrapping heads on a packaging line, holding a stable low set pressure for the delicate cylinders while the lubricator keeps their seals and surfaces running smoothly.
Supplies treated air to the dobbies, air jets and tension rollers of textile equipment, where the low-pressure regulator suits circuits that run at modest set pressures and the fine filter guards the jet nozzles.
Start with the port and size step: the 200 size carries a 1/8 in port, and the GC family steps through 300, 400 and 600 as your air consumption grows - match the step to the flow your circuit needs rather than to the port alone. This unit already carries the fine 5 um element (W); if your application tolerates coarser filtration, the 40 um standard grade is the alternative. The drain here is the differential-pressure type, which bleeds the bowl automatically as the pressure differential builds; automatic (A) and manual (M) drains are the other decodable choices. The fitted square gauge reads in psi; MPa and bar scales are also available. Thread is G here, with PT as the standard and G/NPT as order options, and the bracket is included. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number on the page. Tell us your application and consumption and we will confirm the flow figures from the datasheet on request, and check the 200 size against your requirement before you order.
This is the L low-pressure regulator variant of the GC200 set, and the exact regulation range for the low-pressure type is not published in the catalogue. If your circuit runs at a specific set pressure, ask us to confirm the range from the datasheet before ordering; the standard (non-L) GC regulator is available if your range is conventional.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.