The AirTAC GC20006LF2WK AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006LF2WK is a genuine AirTAC GC200 three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one unit. This configuration is decoded as a size 200 unit with 1/8 in PT ports, a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain on the filter bowl, a low-pressure type regulator, an embedded square gauge reading in psi, and a reverse/check valve fitted. It filters water and particulate from compressed air, holds a set downstream pressure, and adds oil mist to keep downstream air tools and actuators lubricated.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with a choice of ports, threads (PT standard; G and NPT as order options), drain types, filter grades, gauge styles and scales. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm flow and datasheet figures on request.
| Model | GC20006LF2WK AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the pneumatic clamps and tool-change cylinders on a compact CNC milling or turning cell, with the 5 um element protecting the machine's air valves from fine particulate.
Supplies the diverters, pushers and stopper cylinders on a packaging or bottling conveyor line, holding a steady regulated pressure so cartons are pushed consistently shift after shift while the lubricator keeps cylinders running smoothly.
Conditions the air feeding impact drivers, nut runners and air ratchets at an assembly bench, filtering water and grit, regulating supply pressure and delivering oil mist to extend tool life.
Start with the size and port: the 200 size with 1/8 in PT ports suits compact circuits, and stepping up to 300, 400 or 600 gives larger ports and more flow capacity. The 5 um element in this unit is the finer filter grade (40 um is the standard alternative) - choose it where downstream valves and cylinders need cleaner air. Drain is differential-pressure as coded; automatic (A) and manual (M) drains are available on the family. The gauge here is the embedded square type with a psi scale; an external round gauge with MPa, psi or bar scales is optional. Thread is PT as standard, with G (BSPP) and NPT as catalogue options, and a mounting bracket is included.
Note that this is the low-pressure regulator type; its exact adjustment range is not published in the material we hold, so ask us to confirm it against your set pressure before ordering. Flow is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure, set pressure and the flow your application needs, and we will confirm against the datasheet whether this 200-size unit with 1/8 in PT ports is correctly sized before you order.
The L in the code marks this as the low-pressure type regulator rather than the standard type; its exact adjustment range is not published in our current material, so confirm your set pressure with us before ordering. The filter bowl uses the differential-pressure drain (the default), which bleeds accumulated water automatically as flow passes through, with no manual draining routine required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.