The AirTAC GC20006MC2 AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20006MC2 is an AirTAC GC200 three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled to condition compressed air in one station. The filter element removes water and particulate down to 40 um, the standard regulator holds downstream pressure within its 0.05-0.9 MPa (7-130 psi) adjustment range, and the lubricator adds oil mist for downstream air tools and cylinders. This configuration is sized for 1/8 in PT threaded ports, uses a manual drain on the filter bowl, and carries a round gauge reading in psi. The polycarbonate bowls suit the -5 to 70 C (non-freezing) working range, and the maximum inlet pressure is 1.0 MPa (145 psi). A mounting bracket is included.
This is a genuine AirTAC part from the GC series, which spans the 200, 300, 400 and 600 sizes with port options from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um (W) filtration, embedded square or external round gauges in MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC20006MC2 AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds a single 1/8 in outlet at an assembly bench where impact drivers and air screwdrivers need filtered, regulated and lubricated air at a set pressure, with the psi gauge letting operators verify the setting at a glance.
Installed ahead of small pneumatic cylinders and actuators on a packaging machine, cleaning water and 40 um particulate from the shop supply, holding stable regulator pressure and oil-misting the cylinders to extend seal life.
A compact F.R.L. station for a maintenance workshop or job-shop cell, where the manual drain suits a station that is bled down at shift end and the lubricator keeps grinders, ratchets and chisels fed with oil-misted air.
Choose the GC size by the port and flow step your line needs: this 200 unit serves 1/8 in PT ports, while 300, 400 and 600 sizes step up to larger ports and higher flow. Pick the drain by how the station is serviced: manual drain (as here) means an operator bleeds the bowl, automatic drain suits unattended points, and differential-pressure is the default. Filter grade is 40 um standard; specify W for 5 um where finer protection matters. Gauge scale is selectable (MPa, psi or bar) - this unit carries a round psi gauge. Thread is PT as standard, with G and NPT available as order options, and a bracket is included. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your line pressure, downstream demand and port size, and we will confirm the flow and datasheet figures for this unit on request before you order.
The M in GC20006MC2 specifies a manual drain on the filter bowl: an operator opens it to discharge collected water, which suits stations that are checked or shut down regularly. AirTAC also offers automatic drain (code A) for unattended points and differential-pressure drain (blank) as the default; we can quote those variants on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.