The AirTAC GC20006MC2WG AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC20006MC2WG is a three-piece F.R.L. combination unit: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one supply package for compressed air. This configuration is the size 200 unit with a G1/8 port, a 5 um filter element (code W, finer than the 40 um standard), a manual drain on the filter bowl, a standard regulator covering 0.05-0.9 MPa (7-130 psi), a round pressure gauge reading in psi, and a mounting bracket included. The polycarbonate bowls let you see condensate and oil level at a glance.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with port options, drain types (differential-pressure, automatic or manual), filter grades (40 um standard, 5 um optional), gauge styles and scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC20006MC2WG AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds clean, regulated, lubricated air to the pneumatic clamps and tool-change cylinders on a small CNC cell, with the 5 um element protecting fine spools and the psi gauge giving the operator a visible setpoint.
Mounted at the drop of a cartoning or case-packing conveyor, it conditions the air driving the box-forming and sealing cylinders, with the lubricator keeping cylinder seals working shift after shift.
Serves a bench drop for impact drivers and air ratchets in an assembly shop: the regulator holds a steady working pressure, the 5 um filter keeps water and grit out of the tools, and the oil mist lubricates them in use.
Start with the port and size step: size 200 with a G1/8 port is the smallest step in the GC range, so move up to 300, 400 or 600 if your line draws more air - match the step against required flow, which we confirm from the datasheet curves on request. This unit carries the 5 um element (W); choose 40 um if your downstream equipment tolerates coarser filtration. The manual drain here means an operator opens the drain periodically; pick automatic or differential-pressure drain if you cannot schedule that. The round psi gauge is fitted; square gauges and MPa or bar scales are the other catalogue choices. Threads come as PT (standard), G or NPT, and the bracket is included.
Before ordering, send us your application details: flow is published as curves, not a single rating, so we will confirm sizing against your demand rather than guess.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a figure here. Send us your application and we will confirm the flow and datasheet figures for this unit on request before you order.
The M in the code sets a manual drain on the filter bowl: an operator opens it periodically to remove collected condensate. If nobody is on site to do that, the same size is available with automatic or differential-pressure drain - tell us and we will quote the alternative configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.