The AirTAC GC20006MC2WK AirTAC F.R.L. 3-Unit PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20006MC2WK is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one 3-piece set, giving filtration (water and particulate removal), pressure regulation and oil-mist lubrication in a single point of air preparation. This configuration is the GC200 size with a PT1/8 (1/8 in) PT thread, a 5 um filter element (the finer of the two catalogue grades), a manual drain on the filter bowl, and a fitted reverse/check valve. The regulator is the standard type with a 0.05-0.9 MPa (7-130 psi) adjustment range, and a round gauge scaled in psi is fitted so the set outlet pressure can be read directly.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of drain types, 40 um or 5 um filtration, gauge styles and scales, PT, G or NPT threads, and optional reverse/check valves. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rating, so we confirm the datasheet and flow figures for your application on request.
| Model | GC20006MC2WK AirTAC F.R.L. 3-Unit PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
A compact workbench cell running small pneumatic screwdrivers, clamps and test actuators gets one point of preparation: the 5 um element strips water and fine particulate, the regulator holds a steady tool pressure read on the psi gauge, and the lubricator mists oil to the tools.
On a packaging line where sealing jaws and small cylinders run continuously, this F.R.L. set at the machine drop cleans the air, locks the operating pressure against supply swings, and carries lubricant mist downstream - with the check valve holding the setting through brief supply dips.
A lab rig or pilot line drawing small volumes of air for grippers, valves and sample-handling actuators uses the PT1/8 connection and fine 5 um grade at a wall or bench supply, with manual draining fitted into a routine where an operator is present anyway.
Start with the size and port: the 200 series with PT1/8 suits the smallest branch lines and compact machines, while stepping up to 300/400/600 buys more flow capacity - match the port step to the air demand of the circuit rather than oversizing by habit. This unit carries the 5 um element (code W); choose it where downstream valves and cylinders are sensitive to finer particulate, and stay with the 40 um standard grade where coarser protection is enough. The manual drain means someone opens the drain on the filter bowl as part of routine checks - pick the automatic or differential-pressure drain option instead if the unit will sit where regular draining is impractical.
Further decodable choices: gauge style (embedded square as standard, external round optional) and scale (MPa, psi or bar - this unit has a psi round gauge); thread standard PT with G (BSPP) and NPT as order options; and the reverse/check valve, fitted here with code K, which holds downstream pressure if the supply drops. A mounting bracket is included. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your application and required flow and we will confirm the datasheet and curve figures for this 200-size, PT1/8 unit on request before you order.
The M in the code sets a manual drain on the filter bowl: accumulated water is released by opening the drain during routine checks. If the unit will be mounted where nobody drains it regularly, the catalogue also offers an automatic drain (code A) and a differential-pressure drain (blank) on the same GC200 size - ask us to quote the alternative configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.